Remove MRI artifact from the source physiological data
MRI Smart Amplifiers remove most MRI related artifact at the source, so signals can often be sampled at the same rate as during non-MRI recording. Signal processors distinguish between the physiological signal and MRI artifact as manifested by gradient switching/RF pulsing during MRI sequences, such as any Spin Echo Sequence (e.g., EPI).
A Filtered cable set can be used with EGG100C Electrogastrogram—contact BIOPAC for setup options.
See More...Special filtered cable sets, electrodes & electrode leads
These “radio-translucent” electrodes and leads are non-magnetic and non-metallic and provide high quality signals without interfering with the MRI—they must be used for measuring biopotentials in the MRI.
Hardware Bundles are complete solutions for the specified application. Choose your preferred platform and bundle, then click "Request Pricing" to request an estimate, add/remove items, or complete purchase. If you have questions about specific items, click through to the product web page for details and specifications, or contact your Local Sales contact.
MP160 System
MRI | MRI Biopotential Signals
Facial EMG | MP160 with AcqKnowledge plus EMG MRI amp with EL510 disposable electrode setup; includes 100 pre-wired 3-lead Ag-AgCl radio-translucent electrodes.
MP160 System
MRI | MRI Biopotential Signals
MP160 System with EOG amplifier, cable set, three leads & disposable electrodes for MRI, and impedance checker
MP160 System
MRI | MRI Biopotential Signals
MP160 with E-Prime and EDA MRI amplifier, leads and disposable electrodes
MP160 System
MRI | MRI Biopotential Signals
MP160 with AcqKnowledge plus EMG MRI amp with disposable radio-translucent electrodes
MP160 System
MRI | MRI Biopotential Signals
MP160 plus AcqKnowledge with ECG MRI amp, MRI cable/filter system to biopotential amps, disposable radiotranslucent electrodes and electrode gel
MP160 System
MP160 System
MP160 System
MP160 System
MP160 System
The Dual Wireless Respiration and ECG BioNomadix Transmitter is optimized for respiration and electrocardiogram data; record one or both signals with the Smart Center, Logger, or a matched Receiver. RSP (CH A)–measure abdominal or thoracic expansion and contraction while breathing ECG (CH B)–record electrical activity generated by the heart The high signal to noise ratio and […]
View AllBIOPAC provides software and hardware that allows engineers to study the body. Here are a few notable studies using BIOPAC equipment for Biomedical Engineering research. Rehabilitating the Rehab Industry Could physical therapy be done from the comforts of your own home? If possible, this would open the door for more people with all sorts of ailments to […]
BIOPAC’s comprehensive Introductory ECG Guide addresses fundamental to advanced concerns to optimize electrocardiography data recording and analysis. Topics include: ECG Complex; Electrical and Mechanical Sequence of a Heartbeat; Systole and Diastole; Configurations for Lead I, Lead II, Lead III, 6-lead ECG, 12-lead ECG, precordial leads; Ventricular Late Potentials (VLPs); ECG Measurement Tools; Automated Analysis Routines for extracting, […]
Read All