BIOPAC® Systems, Inc. Logo

Inverted Waveform

To invert a waveform:

  1. Select “Transform > Waveform Math…”.
  2. Source 1 should be the channel to be inverted, the operation should be “*”, Source 2 should be K (constant), and the Destination should be the same channel as Source 1 (or “New” to retain the original waveform along with an inverted copy).
  3. Set the value of the Constant, K, to -1.
  4. Make sure “Transform entire wave” is checked.
  5. Click “OK”.

Page last modified 29Dec2014

Associated Applications

Associated Application Notes

Spotlight On
Impedance electrodes with leads

Bioimpedance Strip Electrode with Leads

Pack of four strip electrodes with TP leads attached, intended for bioimpedance applications. Each electrode is 16.5 cm x 1.3 cm (6.5″ x 0.5″) with four 15 cm lead cables that terminate in 1.5 mm Touch Proof sockets. The electrode  is foam backed and uses hydrogel to adhere the electrode to the participant and provide […]

View All
Latest News

New Citations | BIOPAC in Exercise Physiology

Exercise physiology is the study of the body’s response to physical activity. Research in exercise physiology allows for insights in health and for a better understanding of the functions of the body at work. Here are some recent studies in exercise physiology that utilized BIOPAC tools for their research… Effect of exercise on electrocardiographic parameters […]

Electrocardiography Guide Available

BIOPAC’s comprehensive Introductory ECG Guide addresses fundamental to advanced concerns to optimize electrocardiography data recording and analysis. Topics include: ECG Complex; Electrical and Mechanical Sequence of a Heartbeat; Systole and Diastole; Configurations for Lead I, Lead II, Lead III, 6-lead ECG, 12-lead ECG, precordial leads; Ventricular Late Potentials (VLPs); ECG Measurement Tools; Automated Analysis Routines for extracting, […]

Read All
Request a Demonstration
Request a Demonstration