Outputting a signal through the STM100C
Any signal recorded from a BIOPAC amplifier can be output through the stimulator. The stimulator Source switch must be set to CH16 (mislabeled “CH 15”) and the amplifier must be set to channel 16. With monaural headphones or speakers plugged in to the Ext Stim output, you will hear the signal that is being output from the amplifier.
Page last modified 31Dec2014
Associated Applications
Associated Application Notes
WHAT'S NEW
Electroencephalography (EEG) is a highly versatile signal in physiology research Researchers are...
Stay Connected