BIOPAC offers three solutions for human respiration measurements inside the MRI. The respiration belt is the easiest and most reliable method, but the pressurer pad or fast response thermistor also work well.
This MR Safe fully-pneumatic respiration transducer measures subject respiration (thoracic or abdominal) in the MRI. The extremely unobtrusive design presents minimal resistance to movement and can measure arbitrarily slow to very fast respiration patterns with no loss in signal amplitude, while maintaining excellent linearity and minimal hysteresis.
The TSD221-MRI includes the respiration sensor in a mesh strap with self-adhering band (70 cm), a pressure transducer (±2.5 cm H2O TSD160A), and three cascadable segments of tubing for up to 15.8 m.
Interface: Connects to the DA100C and an MP150 or MP100 System—does not require cable set MECMRI-DA or MECMRI-TRANS.
See More...
This is one of many ADVANCED FEATURES for the selected Application. Scroll down for hardware options.
The TSD202A-MRI is a very small, fast response temperature probe appropriate for use in locations where temperature changes rapidly, as with the temperature changes of inspired/expired breath. Place it under the nose, or over mouth and record the temperature change as the subject breathes in and out. The subject must breathe through their nose or mouth in order for this method to work. Use TAPE1 to secure the TSD202A-MRI.
Interface: MECMRI-TRANS filtered cable set + SKT100C Skin Temp Amplifier
Place the TSD110-MRI under a strap that is wrapped around the subject’s chest, or tape the transducer directly to the chest to record respiration. The transducer also works well with small animals – place the anesthetized animal on top of the pad to record respiration.
Interface: DA100C General Purpose Transducer Amplifier
Hardware Bundles are complete solutions for the specified application. Choose your preferred platform and bundle, then click "Request Pricing" to request an estimate, add/remove items, or complete purchase. If you have questions about specific items, click through to the product web page for details and specifications, or contact your Local Sales contact.
MP160 System
MRI | MRI Respiration
MP160 System with AcqKnowledge plus MRI amplifiers, cables, and transducers for ECG and Respiration
MP160 System
MRI | MRI Respiration
MP160 plus AcqKnowledge with ECG MRI and transducer amps and MRI respiration transducer
MP160 System
MRI | MRI Respiration
MP160 System with MRI amplifiers, cables, and transducers for Respiration and ECG
MP160 System
MRI | MRI Respiration
MP160 plus AcqKnowledge with transducer amp and respiration transducer for MRI
MP160 System
MP160 System
MP160 System
MP160 System
The ECG100C-MRI Electrocardiogram Amplifier records electrical activity generated by the heart and will reliably record ECG from humans, animals and isolated organ preparations. The amplifier output can be switched between normal ECG output and R-wave detection. The R-wave mode outputs a smoothed pulse with the occurrence of each R-wave. The exact timing of the R-wave […]
View AllBIOPAC provides researchers with a complete range of tools to gather data on heart rate variability (HRV). The following studies demonstrate just some of the ways in which HRV research benefits from the implementation of BIOPAC hardware and software solutions. PTSD and HRV Post-traumatic stress disorder (PTSD) has been associated with dysfunction of the autonomic […]
BIOPAC’s comprehensive Introductory ECG Guide addresses fundamental to advanced concerns to optimize electrocardiography data recording and analysis. Topics include: ECG Complex; Electrical and Mechanical Sequence of a Heartbeat; Systole and Diastole; Configurations for Lead I, Lead II, Lead III, 6-lead ECG, 12-lead ECG, precordial leads; Ventricular Late Potentials (VLPs); ECG Measurement Tools; Automated Analysis Routines for extracting, […]
Read All