BIOPAC® Systems, Inc. Logo

Response/Hand Force for MRI

Extend Discovery into the MRI

Advanced technology for MRI-based research

Request More Info
Response/Hand Force for MRI
Part #: TSD114-MRI

Subjects can indicate a response while in the MRI by squeezing this pump bulb by hand or applying pressure via foot, thigh, etc. to  The device is based on pneumatic principles of operation and has high accuracy for pressure measurements, on the order of ±1%. Includes one 10 meter polyethylene tube; additional polyethylene tube extensions are available from BIOPAC.

The TSD114-MRI consists of

  • Pump bulb (RXPUMPBULB-MRI)
    maximum diameter: 5.8 cm
    length: 11.1 cm
  • Pressure transducer (TSD104A)
  • Tubing (AFT30-XL)

MRI Use: MR Safe (see Specifications for components)

See More...

Hand Force/Response MRI Transducer
View Spec PDF

Are You Looking for These?

Part #: TSD114-MRI
Categories: MRI Magnetic Resonance Imaging - Research
Subcategories: Transducers - Research

Alternatives
For the same Platform

Equivalents
With a different Platform

Details

Compatibility


Pass the tubing from the chamber room through the waveguide to interface with the TSD104A Pressure Transducer in the Control room.

The output of the TSD114-MRI device is ultimately voltage; to obtain usable voltage output, the device requires amplification via BIOPAC’s DA100C. The TSD114-MRI has a signal output which is variable, and this output signal variability is linear to applied pressure in the squeeze bulb.

If the durable rubber pump bulb requires replacement, contact BIOPAC about RXPUMPBULB-MRI.


Using with third-party A/D converters

To use the TSD114-MRI with a third-party A/D converter, use DA100C and IPS100C.

DA100C amplifies and conditions the mV level signal coming from TSD114-MRI
IPS100C will supply isolated power to DA100C

High level output voltage (anywhere in the range of ±10 V, such as 0-5 V) can be obtained via the front panel of IPS100C, via 3.5 mm phono plug. This signal can be directed straight to the third-party A/D converter.

Support

Applications

Downloads/Resources

Knowledge Base

Recommended Items

Spotlight On
NIBP100E Amplifier ships with 3 finger cuffs

Noninvasive Blood Pressure Amplifier

The NIBP100E noninvasive blood pressure system provides continuous, beat‐to‐beat, blood pressure signal and values (Sys, Dia, MAP) and Pulse Rate (PR)*.  The NIBP100E amplifier with CNAP™ technology is controlled by AcqKnowledge software (v5.0.7) for MP160 Research Systems. The system outputs a continuous blood pressure waveform that is similar to a direct arterial pressure waveform. The amplifier […]

View All
Latest News

New Citations | Physiological Measures to Understand Stress

BIOPAC provides software and hardware that allows research teams to study physiological measures related to stress. Here are a few notable studies using BIOPAC equipment for ECG, EDA, and EEG/ERP. Moms Moderating Stress Can relaxation techniques help lower stress on both mother and fetus? Using an MP36R Data Acquisition system to record ECG and EDA, this study […]

Electrocardiography Guide Now Available

BIOPAC’s comprehensive Introductory ECG Guide addresses fundamental to advanced concerns to optimize electrocardiography data recording and analysis. Topics include: ECG Complex; Electrical and Mechanical Sequence of a Heartbeat; Systole and Diastole; Configurations for Lead I, Lead II, Lead III, 6-lead ECG, 12-lead ECG, precordial leads; Ventricular Late Potentials (VLPs); ECG Measurement Tools; Automated Analysis Routines for extracting, […]

Read All
Request a Demonstration
Request a Demonstration