BIOPAC® Systems, Inc. Logo

Scent Delivery System (1-8)

Modular Scent Delivery for olfactory stimulation

Easily enrich your research study with up to 8 scents

Extraction Filter is perfect for labs with poor ventilation or no outside windows

Request More Info
Scent Dispersal System
Part #: SDS200-SYS

Project scents on cue for a predetermined time and then extract to clear for the next scent. Deliver multiple scents throughout the experiment.

The new Scent Delivery System includes:

Scent Delivery Module(s) for wet or dry scents SDS200 – order from 1 to 8 modules
Carbon Air Filter System extraction fan for in-lab ventilation SDS200FILTER
Solid State Relay Driver (8-Channel) OUT8 supports up to 8 modules or 7 with filter
Scent System Accessories SDS200ACC

No programming required—triggered via digital lines. Integrates with stimulus presentation system, VR, and manual control lines. Works with dry or oil-based scents (scent packets, scent gels, essential oils, etc.). For Scent packages, order SCENT—over 100 scent options available: Scent List olfactory stimulation

See More...

Scent Delivery for Research Studies
View Spec PDF

Are You Looking for These?

Part #: SDS200-SYS
Categories: Stimulation - Research, VR/Immersive - Research
Subcategories: Olfactory (Scent) Delivery - Research, Environment Resources - Research

Details

Compatibility


Scent Delivery Module(s) SDS200

Single-channel scent delivery module for olfactory stimulation. It has two modes of operation: wet or dry. In wet mode, water is added to the chamber and essential oil is used for the scent. The chamber contains an ultrasonic diffuser that mixes the oil to deliver a cool stream of scent to the participant. In dry mode, a dry scent packet is placed in the chamber and the fan delivers the scent to the participant without the need for water. The module is controlled by an MP160, or a suitable control signal. The device interfaces with stimulus presentation systems and virtual reality setups to deliver multiple scents throughout the experiment. Eight SDS200 Modules will interface with a single MP160. Each module comes with a power supply, CBL102, AFT12* (*m) 22 mm tubing to deliver the scent to the participant (Use longer length of AFT12 – 3m/10′). The interface cable connects the SDS200 Module to the included OUT8 Solid State Relay Driver.

Carbon Air Filter System SDS200FILTER

This activated carbon air filter system removes scents from the air when using the SDS200-SYS Scent Delivery System. This is perfect for labs with poor ventilation systems and no outside windows. The SDS200FILTER has two control modes.

  • Automatic control: When used with the included  OUT8, the filter can be turned ON and OFF by the MP160, stimulus presentation software, or a Virtual Reality system.
  • Manual control (stand-alone use): In manual mode, the fan operates continuously and frees up one of the 8 lines on the OUT8, which permits the use of an additional SDS200 Scent Delivery Module.

The system includes a 7.62 m length of tube and a large carbon filter, which can be placed in the same room or run out of a door. The speed of the fan can be controlled to help optimize performance and control noise levels. The fan is located at the filter end of the tubing to minimize sound at the participant end. The system includes a mounting clamp and tripod to optimize the lab setup. The SDS200FILTER interfaces with the OUT8 via an included CBL102 BNC to 3.5 mm cable.

Solid State Relay Driver OUT8

The OUT8 allows the Carbon Air Filter System to be turned ON and OFF by the MP160, stimulus presentation software, or a VR system. If the Carbon Air Filter System is set to manual mode, the fan operates continuously and frees up one of the eight lines on the OUT8, which permits the use of an additional SDS200 Scent Delivery Module.

Scent System Accessories SDS200ACC

Two manifolds for controlling and managing the tubing for up to eight (8) different scents. The manifolds stack and can be mounted on the SDS200FILTER or on the included tripod to help optimize setup.  The tripod makes mounting near the participant convenient. (Use tubing provided with each SDS200 module.)

Support

Downloads/Resources

Knowledge Base

Recommended Items

Spotlight On
Cardiac Output amplifier

NICO Smart Amplifier

The NICO Smart Amplifier is specifically designed to measure thoracic impedance for performing noninvasive cardiac output measurements. The amplifier terminates in two connectors for impedance (Z) and its derivative (dZ), and has a 3 m cable that connects directly to an AMI100D Amplifier Input Module. Use with EL526 strip electrodes and CBL246 adapter or with EL500 […]

View All
Latest News

New Citations | BIOPAC in ANS Research

The autonomic nervous system (ANS) is responsible for regulating the functions of all the body’s organs. Take a look at this month’s citations to see how to apply BIOPAC’s tools and learn techniques for ANS research… Comparable responses to a wide range of olfactory stimulation in women and men. Scientific Reports, 13(1), 9059. Lillqvist, M., Claeson, […]

Electrocardiography Guide Available

BIOPAC’s comprehensive Introductory ECG Guide addresses fundamental to advanced concerns to optimize electrocardiography data recording and analysis. Topics include: ECG Complex; Electrical and Mechanical Sequence of a Heartbeat; Systole and Diastole; Configurations for Lead I, Lead II, Lead III, 6-lead ECG, 12-lead ECG, precordial leads; Ventricular Late Potentials (VLPs); ECG Measurement Tools; Automated Analysis Routines for extracting, […]

Read All
Request a Demonstration
Request a Demonstration