Stimulation

This eight-channel solid state relay driver has 8 BNC female connectors to drive solid state relays from an MP160 System.…

Replacement actuators and isolators for the HDS100 Haptic Delivery System for tactile feedback during virtual reality experiments. Actuators are placed…

The Chronos® USB-based response and stimulus device features millisecond accuracy in the areas of stimulus, response, sound output, and external…

The Constant Voltage Stimulator – Unipolar Pulse (STM200) has digital display, a keyed range switch (remove key for added safety),…

The STMISOLA Constant Current and Constant Voltage Isolated Linear Stimulator is used with an MP System to output either voltage…

E-Prime provides experiment generation and millisecond precision data collection through data handling and processing. E-Prime is a powerful suite of…

This stimulus presentation package includes E-Prime 3 experiment generator and an isolated digital interface (STP100C) with parallel port cable (CBL110C).…

Send event markers via USB with high precision. c-pods simplify connection & timing details and deliver guaranteed jitter-free performance. Asynchronous Output Scheduler Pattern Generation…

Use m–pod to map any input signal to any output pin, or combine any number of input signals to a single output pin and…

StimTrac Module ETAnalysis Licensed Feature Add-on for Existing Argus Eye Tracking Glasses Users The StimTrac (Stimulus Tracking) Module adds exciting…

The TSD190 is a haptic (tactile) stimulator that is ergonomically designed to strap onto a variety of body locations. It…

The haptic delivery system provides tactile feedback during virtual reality experiments. The system includes: audio amplifier that connects to a…

These wide response high-fidelity headphones are used for auditory stimulus (short tones or clicks) or to listen to physiological signals…

These monaural headphones can be used with the STM100C stimulator module to deliver a tone signal while recording data for…

The STMHUM is a direct, human-safe stimulator that provides pulse output in the range of 0-100 V. The maximum width…

Access 8 digital TTL Inputs This 1-meter cable connects to the small I/O port on the Smart Center or MP46 2-channel BSL…

The STP-IO digital breakout board allows for access to the isolated digital input and output lines of the STP100D isolated…

The STP100D is used to safely isolate digital inputs (in the range of 0-3.3 V or 0-5.0 V) and outputs…

These Event Presentation & Marking Systems include m-pod, SuperLab Pro Stimulus Presentation Software, Response Pad (RB-740), and BIOPAC interface cable (option to…

The OUT102 piezo transducer is very useful for providing an audible stimulus, or alarm, when a physiological signal passes a…

The STMEPM Programmable Stimulation System for E-Prime allows a user to interface the STMISOLA Stimulator with E-Prime to control the…

Electrical stimulation system designed exclusively for MRI or fMRI The STMEPM-MRI Programmable Stimulation System for E-Prime allows a user to…

Add olfactory stimulation to a virtual world or other protocol with scent packets. Each scent is shipped in a 5-pack of…

Project scents on cue for a predetermined time and then extract to clear for the next scent. Deliver multiple scents…

These Event Presentation & Marking Systems include StimTracker (Duo or Quad), m-pod, SuperLab Pro Stimulus Presentation Software, and BIOPAC interface cable (option…

StimTracker Duo. StimTracker Quad MARK. SYNC. AUDIT. StimTracker Duo and Quad autonomously detect the onset of events to avoid operating system delays.…

The STM100C module provides pulse and waveform stimulus outputs for nerve conduction, evoked response (e.g., ABR studies audio stimulus-response (e.g.,…

STMISO series Stimulation Isolation Adapters can stimulate with pulse, sinusoidal or arbitrary waveforms and are ideal for nerve conduction (with NERVE1 Nerve…

This DSUB9 to 3.5 mm mono jack interface allows the MP36/MP36R to be used with the STMISOLA Isolated Linear Stimulator for arbitrary…

The TSD122 Stroboscope can generate or respond to a TTL synchronizing signal for data acquisition and can: Be used for…

Use CBLSTP-IO to connect both a SuperLab system and an STP-IO digital I/O breakout board simultaneously to the 37-pin connector…

The STP35 Interface Cable connects SuperLab to an MP36/35 Biopac Student Lab System unit or MP36R Research System unit. The…

The STP100W SuperLab Stimulus Presentation System is a stand-alone system that measures subject responses to visual or auditory stimuli. It…

The STP35W is a stand-alone system that measures subject responses to visual or auditory stimuli. Includes SuperLab, m-pod, response box, and…

The STMTHERM is a thermal stimulator that can deliver both hot and cold temperature stimulation to a subject. The STMTHERM…

The TSD191 Thermode has a 30 mm x 30 mm contact area to deliver hot/cold thermal stimulation pulses when driven…

Use the OUT101A tubephone to deliver clicks and tones in auditory evoked response applications (e.g., ABR auditory brainstem response). The…

USB-TTL Interface is a USB module which provides 16 TTL I/O lines that can have up to millisecond accuracy. It…

The Visual Stim Interface is used to generate TTL level event markers for visual stimulus presentation systems. Four light sensitive…