Isolated Digital I/O Board
The STP-IO digital breakout board allows for access to the isolated digital input and output lines of the STP100D isolated digital interface module. This DB37 D-SUB Female 37-pin Terminal Breakout PCB Board connects directly to the 37-pin connector on the STP100D, providing access to digital channels 0-7 for digital output and digital channels 8-15 for digital input.
- The first digital input channel is on pin 3 with the final digital input on pin 10.
- The first digital output channel is on pin 37 and the final digital output channel is on pin 30.
- Ground is available on pin 19 and pin 21.
If a connection to SuperLab is required at the same time the STP-IO needs to be used, use CBLSTP-IO to connect both simultaneously.
Details
Support
Knowledge Base
- * CLEANING GUIDELINES *
- About License Keys
- AC mode
- AcqKnowledge accuracy
- AcqKnowledge iLok key lost or unavailable
- Amplifier analog output signals
- Amplifier filter settings
- Arbitrary waveform stimulation
- Band-pass and band-stop filters
- BioNomadix Signal Interruption
- Calculating file sizes
- Calibration values
- Checking Finger Cuff Lifetime for NIBP100D/NIBP100D-HD
- Common mistakes/general troubleshooting
- Connecting Calibration Gas Tanks & Mixing Chambers
- Editing noisy data
- Electrodermal activity measurements
- Event Markers | Correcting Automated Placement
- Excel files exported from BIOPAC software open in Excel 'Protected View'
- Glossary of specification terminology
- Grounding guidelines
- High pass filters
- How can I move QRS peak event marks from the bottom of S waves to the top of R waves?
- Installation CD/DVD lost or damaged...how can I re-install software?
- Interfacing third-party transducers
- Low pass filters
- Notch filter
- Railing signal (flatline)
- Recording good data
- Troubleshooting MP160 Ethernet Communication
- Using other software with BIOPAC hardware
- VREF, reference excitation voltage
Stay Connected