Stimulation
Cables for Stimulation
BIOPAC offers a series of cables for use in human and animal physiology experiments requiring stimulation. Cables are available in a variety of lengths and termination options. Some cables may be used to interface stimulating electrodes or to connect directly with an animal preparation. Feedback cables and a current limter are also available.
Current Feedback Monitor Cable 1 V = 10 ma
Part #: CBLCFMA
This Current Feedback Monitor Cable will permit current sampling and can be used with any BIOPAC Stimulator for current verification.…
Current limiters: 2 ma (2.2 ma max)
Part #: CBLLIMIT2, CBLLIMIT2AC
These cables establish current limiting (2 ma target limit, 2.2 ma maximum) over a compliance voltage range of ±200 volts…
I/O Interface for TTL Inputs
Part #: BN-SMART-IOCBL
Access 8 digital TTL Inputs This 1-meter cable connects to the small I/O port on the Smart Center or MP46 2-channel BSL…
Interface Cables CBL200 Series
Part #: CBL200, CBL229, CBL246, CBL201, CBL202, CBL203, CBL204, CBL205, CBL206, CBL207
Lead interface adapter options: CBL200 2 mm pin to Safety Socket CBL201 Safety Socket to 2 mm pin (use for…
Isolated Digital I/O Board
Part #: STP-IO
The STP-IO digital breakout board allows for access to the isolated digital input and output lines of the STP100D isolated…
Measurement Computing 4-ch D/A to STMISOLA
Part #: CBLEPM
The CBLEPM connects the STMISOLA/L to a Measurement Computing 4-channel D/A unit. 3.5 mm phone jack connects to STMISOLA/L phone…
Output Adapter RJ11 to MP36
Part #: OUT6
Use this DSUB9 to RJ11 jack Output Adapter to map the analog output of an MP36 or MP36R to an…
Stimulator Interface Cables
Part #: BSLCBL7, BSLCBL11, BSLCBL12
Use to interface stimulating silver or platinum wire electrodes or to connect directly with an animal preparation or isolated tissue…
SuperLab + STP-IO Adapter Cable
Part #: CBLSTP-IO
Use CBLSTP-IO to connect both a SuperLab system and an STP-IO digital I/O breakout board simultaneously to the 37-pin connector…
Visual Stim Interface
Part #: STMSYNC-VIS
The Visual Stim Interface is used to generate TTL level event markers for visual stimulus presentation systems. Four light sensitive…