Compatibility
The TSD122 is battery-operated and will operate from zero to 12,000 flashes a minute.
See TSD122 Setup for details on connecting to an MP System.
See BSL PRO Lesson H22 Visual Evoked Potentials for setup guidelines.
Stroboscopes
Life Science Data Acquisition at its Best
Generate or respond to a TTL synchronizing signal
The TSD122 Stroboscope can generate or respond to a TTL synchronizing signal for data acquisition and can:
- Be used for single pass or averaging type visual evoked response applications.
- Synchronize the stroboscope to an averaging pass.
- Trigger the stroboscope during acquisition or during an averaging pass.
- Trigger an acquisition or an averaging pass with the stroboscope.
- Use a digital input to acquire the signal synchronized with the stroboscope.
- Use an analog input to acquire the signal synchronized with the stroboscope.
TSD122A connects to the HLT100/MP160, UIM100C/MP150, or STM100C with included interface cable CBL102, CBL106, or CBL109.
TSD122C connects the MP36R or BSL MP36 and includes interface cable BSLCBL5.
The stroboscope can go from zero to a maximum of 12,000 flashes per minute and provides 360,000 flashes between charges.
See More...
Are You Looking for These?
Part #: N/A
Categories: Stimulation - Education, Stimulation - Research
Subcategories: Stroboscopes - Education, Stroboscopes - Research
Subcategories: Stroboscopes - Education, Stroboscopes - Research
Details
Support
Applications
Downloads/Resources
Knowledge Base
- * CLEANING GUIDELINES *
- About License Keys
- AC mode
- AcqKnowledge accuracy
- AcqKnowledge iLok key lost or unavailable
- Amplifier analog output signals
- Amplifier filter settings
- Arbitrary waveform stimulation
- Band-pass and band-stop filters
- BioNomadix Signal Interruption
- Biopac Student Lab (BSL) Newest Features
- Calculating file sizes
- Calibration values
- Checking Finger Cuff Lifetime for NIBP100D/NIBP100D-HD
- Common mistakes/general troubleshooting
- Connecting Calibration Gas Tanks & Mixing Chambers
- Editing noisy data
- Electrodermal activity measurements
- Enabling the Transform Menu in BSL Analysis (RSD)
- Event Markers | Correcting Automated Placement
- Excel files exported from BIOPAC software open in Excel 'Protected View'
- Glossary of specification terminology
- Grounding guidelines
- High pass filters
- How can I move QRS peak event marks from the bottom of S waves to the top of R waves?
- Installation CD/DVD lost or damaged...how can I re-install software?
- Interfacing third-party transducers
- Low pass filters
- Notch filter
- Railing signal (flatline)
- Recording good data
- Troubleshooting MP160 Ethernet Communication
- Using other software with BIOPAC hardware
- VREF, reference excitation voltage
Stay Connected