Stimulation

Stimulation Solutions for Your Classroom

BIOPAC offers a line of human-safe stimulators and accessories for your life science lab, supporting both basic and advanced experiments. Stimulators are avaliable for both human subjects and animal tissue. These Stimulation options interface to MP36/36R, MP35, MP30, or MP45 systems and allow educators to perform a variety of experiments with the Biopac Student Lab system, support the design of educator’s own experiments, or support research experiments that include the use of stimulation.

Reset

Education

Stimulation

Page: 1 of 1

Total Products: 26

m-Pod Event Presentation & Marking Systems

Part #: STM-M-POD-SYS-IO, STM-M-POD-SYS-STP

These Event Presentation & Marking Systems include m-pod, SuperLab Pro Stimulus Presentation Software, Response Pad (RB-740), and BIOPAC interface...

StimTracker Event Presentation & Marking Systems

Part #: STK100-DUO-SYS-stp, STK100-DUO-SYS-io, STK100-QUAD-SYS-stp, ST...

These Event Presentation & Marking Systems include StimTracker (Duo or Quad), m-pod, SuperLab Pro Stimulus Presentation Software, and BIOPAC...

Force Transducers 20 g 50 g 100 g 200 g

Part #: TSD125B, TSD125C

TSD125 series force transducers interface with the DA100C general-purpose transducer amplifier The TSD125 series force transducers have been designed...

Subject Response Transducers

Part #: TSD116B, TSD116C

The TSD116 series is used for externally triggering data acquisition, remote event marking, or psychophysiological response tests The switches can...

Heated Pneumotachs

Part #: TSD137H

TSD137 Series heated pneumotachs can perform a variety of pulmonary measurements relating to airflow, lung volume, and expired gas analysis Each...

Headphones

Part #: OUT1, OUT1A

These wide response high-fidelity headphones are used for auditory stimulus (short tones or clicks) or to listen to physiological signals (like EMG)...

Human-safe Stimulator 0-100 V

Part #: STMHUM

The STMHUM is a direct, human-safe stimulator that provides pulse output in the range of 0-100 V The maximum width pulse that can be generated is...

Programmable Stimulation System for E-Prime

Part #: STMEPM

The STMEPM Programmable Stimulation System for E-Prime allows a user to interface the STMISOLA Stimulator with E-Prime to control the stimulus...

SuperLab Interface Cbl to MP36/36R/35

Part #: STP35

The STP35 Interface Cable connects SuperLab to an MP36/35 Biopac Student Lab System unit or MP36R Research System unit The STP35 cable interfaces...

SuperLab System for MP36/35 or MP36R

Part #: STP35W

The STP35W is a stand-alone system that measures subject responses to visual or auditory stimuli Includes SuperLab, c-pod, and response...

Cbl Stim BNC-M - 3.5 mm socket, 1.3 m

Part #: BSLCBL6

The BSLCBL6 interfaces with the BSLSTM Biopac Student Lab Stimulator and the OUT100 Headphones This cable is required for Auditory Evoked Response...

Visual Stim LED via Analog out

Part #: OUT4

The OUT4 is a high-brightness LED output device mounted on an angled stand intended to sit on a lab bench and provide a good viewing angle for...

Low Voltage Stimulator, BSL MP35

Part #: SS58L

Use the low voltage stimulator with any electrode or lead with a BNC connector (such as needle electrodes or clip leads) for direct stimulation of...

MP36/35 to parallel port, 3 m

Part #: STP35B

MP36/35 to E-Prime, Direct RT, MediaLab, Inquisit, and other systems that connect via the parallel port This item replaces the STP35A

Isolated Digital Interface, MP30

Part #: STP30

If you already have SuperLab and the Digital I/O card with the Support Pack, you can interface to the MP30 System using the STP30 interface The STP30...

E-Prime Experiment Generator

Part #: EPM100

E-Prime provides experiment generation and millisecond precision data collection through data handling and processing E-Prime is a powerful suite of...

STMISOLA interface for MP36/36R

Part #: OUT5

This DSUB9 to 35 mm mono jack interface allows the MP36/MP36R to be used with the STMISOLA Isolated Linear Stimulator for arbitrary stimulus...

Voltage Stimulators

Part #: BSLSTMB, BSLSTMA

The Voltage Stimulator connects to either the MP36/MP35 or the MP30 BNC output provides compatibility with a variety of stimulator cables The...

Stroboscopes

Part #: TSD122A, TSD122C

The TSD122 Stroboscope can generate or respond to a TTL synchronizing signal for data acquisition and can: Be used for single pass or averaging...

StimTracker Stimulus Presentation Marker Interface - USB

Part #: STK100-DUO-IO, STK100-DUO-STP, STK100-QUAD-IO, STK100-QUAD-STP

StimTracker Duo StimTracker Quad MARK SYNC AUDIT StimTracker Duo and Quad autonomously detect the onset of events to avoid operating...

Event Marking C-Pods

Part #: STM-C-POD-IO, STM-C-POD-STP

Send event markers via USB with high precision c-pods simplify connection & timing details and deliver guaranteed jitter-free performance ...

Event Marking M-Pods

Part #: STM-M-POD-IO, STM-M-POD-STP

Use m–pod to map any input signal to any output pin, or combine any number of input signals to a single output pin and build your very own...

Stimulus Response Pack

Part #: 40SR-TA

The Stimulus Response Pack for Biopac Science Lab includes a feedback cable (40CBLFB1), headphones (40HP), and an extension cable (40CBLEXT) and is...