The AFT160 rigid 15 mm OD, 22 mm ID Pressure Tap coupler mates one connection with a 15 mm OD and a second connection with a 22 mm ID connection along with a 3.175 mm (1/8″) barb that allows the flow through the connection to be tapped for various purposes. This tap may be used to mate directly with any of the TSD160 series pressure transducers for monitoring pressure in an airflow circuit as well as other compatible amplifiers such as the O2100C and CO2100C. It is directly compatible with the Fluke lung.
This pressure tap is recommended for use with the TSD160 Series Differential Pressure Transducer and VVK100-SYS Ventilator Validation Kit measurement accessories.
Ventilator Validation System
Integrating BIOPAC Research Systems | Data Acquisition & Analysis
AcqKnowledge GUI Overview
HRV | Frequency Domain Measures
You will learn about
– Introduction to HRV
– Theory and guidelines
– Recording great ECG data
– Preparing data for analysis
– Low Frequency (LF) & High Frequency (HF) measures
– Single-epoch spectral HRV analysis
– Multi-epoch spectral HRV analysis
– Automation with scripting and Workflow
– Focus Areas and event-based analysis
LIVE webinar this Thursday!
June 30th 8am PT / 11 am ET
BIOPAC provides researchers with a complete range of tools to gather data on heart rate variability (HRV). The following studies demonstrate just some of the ways in which HRV research benefits from the implementation of BIOPAC hardware and software solutions. PTSD and HRV Post-traumatic stress disorder (PTSD) has been associated with dysfunction of the autonomic […]
BIOPAC’s comprehensive Introductory ECG Guide addresses fundamental to advanced concerns to optimize electrocardiography data recording and analysis. Topics include: ECG Complex; Electrical and Mechanical Sequence of a Heartbeat; Systole and Diastole; Configurations for Lead I, Lead II, Lead III, 6-lead ECG, 12-lead ECG, precordial leads; Ventricular Late Potentials (VLPs); ECG Measurement Tools; Automated Analysis Routines for extracting, […]
Read All