BIOPAC® Systems, Inc. Logo

Humidity Transducer

Request More Info
humidity sensor
Part #: TSD304

The TSD304 Humidity Transducer may be used for ambient humidity measurements or inline gas measurements via a tap compatible with 1/8” NTP threaded connector. The sensor range is 0% to 100% relative humidity with ±3.5% accuracy.

This transducer connects directly to an AMI100D or an HLT100C via a 1.8 m cable.

The transducer can be added to the Ventilator Validation Kit (VVK100-SYS) for STPD results when testing is done with ambient air or a mixture (vs. just dry canister o2). STPD results are needed to satisfy ISO Standards (e.g., ISO 80601-2-12). STPD reporting is the only method that permits ventilator performance comparison no matter altitude, temperature or humidity.

To convert from ATP (Ambient Temperature and Pressure) to STPD (Standard Temperature Pressure Dry), use:

1)  TSD302 temperature sensor (in sampled flow stream)
2) TSD303 Barometric Pressure (in ambient air)
3) TSD304 humidity sensor (in sampled flow stream)

See More...

Humidity Sensor
View Spec PDF

Are You Looking for These?

Part #: TSD304
Categories: Amplifiers - Research
Subcategories: Gas Analysis - Research

Details

Compatibility


Specifications

Range: 0 to 100 % Relative Humidity (RH)
Scale: [0.80v to 3.90v] Ratiometric Response for 0% to 100% RH (typical)
Curve Fit: Vout = [0.031(sensor RH) + 0.80] V, typical at 25 °C
Temperature Compensation: True RH = (Sensor RH)/(1.0546 – 0.00216T), T in °C
Resolution: 0.0080 RH (MP160—no smoothing)
Voltage Range: 0.80 V to 3.90 V (typical)
Response Time: 5 seconds (nominal time constant)
Accuracy: ± 3.5% RH (nominal)
Hysteresis: 3% RH (nominal)
Repeatability: ± 0.5% RH
Long Term Stability: ± 0.5% RH (at 50% RH in one year)
Operating Temperature: -40 to +85 °C
Mounting: Bulkhead 1/8” NPT Nylon
Interface: RJ11 Male Plug (6-pin) to AMI100C or HLT100C
Cable Length: 1.8 meters

Support

Downloads/Resources

Knowledge Base

Recommended Items

Spotlight On
free BIOPAC webinar

Heart Rate Variability Series | Part II: Frequency Domain Measures

HRV | Frequency Domain Measures
You will learn about
– Introduction to HRV
– Theory and guidelines
– Recording great ECG data
– Preparing data for analysis
– Low Frequency (LF) & High Frequency (HF) measures
– Single-epoch spectral HRV analysis
– Multi-epoch spectral HRV analysis
– Automation with scripting and Workflow
– Focus Areas and event-based analysis

LIVE webinar this Thursday!
June 30th 8am PT / 11 am ET

Register Now
Latest News

New Citations | BIOPAC in HRV Analysis Research

BIOPAC provides researchers with a complete range of tools to gather data on heart rate variability (HRV). The following studies demonstrate just some of the ways in which HRV research benefits from the implementation of BIOPAC hardware and software solutions. PTSD and HRV Post-traumatic stress disorder (PTSD) has been associated with dysfunction of the autonomic […]

Electrocardiography Guide Now Available

BIOPAC’s comprehensive Introductory ECG Guide addresses fundamental to advanced concerns to optimize electrocardiography data recording and analysis. Topics include: ECG Complex; Electrical and Mechanical Sequence of a Heartbeat; Systole and Diastole; Configurations for Lead I, Lead II, Lead III, 6-lead ECG, 12-lead ECG, precordial leads; Ventricular Late Potentials (VLPs); ECG Measurement Tools; Automated Analysis Routines for extracting, […]

Read All
Request a Demonstration
Request a Demonstration