BIOPAC® Systems, Inc. Logo

Ag-AgCl Electrodes

Request More Info
Ag-AgCl 4 mm TP electrode
Part #: EL254, EL254RT, EL254S, EL258, EL258H, EL258RT, EL258S

Silver-silver chloride (Ag-AgCl) electrodes provide accurate and clear transmission of surface biopotentials. EL250 series reusable lead electrodes are suitable for most applications (ECG, EEG, EGG, EMG, EOG, and ERS recordings.)

  • Use EL258 (8 mm recording diameter) for most applications
  • EL254S and EL258S are shielded electrodes; best used as recording electrodes.
    • BioNomadix units have no active drive circuit for shielded leads.
  • EL258H features a 2 mm gel injection hole, useful for EEG monitoring; use as both recording and reference electrodes.
  • Use EL254 (4 mm recording diameter) when closely spaced biopotentials are required
  • Use EL254-RT or EL258-RT for animal MRI setups

EL250 series reusable electrodes are permanently connected to robust and pliable leadwires (1 mm OD). The leadwires terminate in standard Touchproof connectors. Unshielded electrodes terminate in a single Touchproof connector. Shielded electrodes terminate in two Touchproof connectors, one connects to the Ag-AgCl disk and the other connects to the leadwire shield.

See More...

BIOPAC data acquisition
View Spec PDF

Are You Looking for These?

Part #: N/A
Categories: Electrodes - Education, Electrodes - Research, MRI Magnetic Resonance Imaging - Research
Subcategories: Electrodes & Accessories - Research, Ag-AgCl Reusable - Education, Ag-AgCl Reusable - Research

Equivalents
With a different Platform

Details

Compatibility


 

The EL254 is unshielded and the EL254S is shielded.

For best signal performance use shielded electrodes (EL254S or EL258S) as recording electrodes and unshielded electrodes (EL254 or EL258) as ground or reference electrodes. Generally, for each Biopotential amplifier module, two EL254S or EL258S and one EL254 or EL258 are required.

Use reusable electrodes with adhesive collars and gel.

Reusable Ag/AgCl Electrode Features

BIOPAC EL250 series and EL650 series reusable electrodes incorporate a variety of features which improve biopotential recordings:

  1. Non-polarizable
  2. Sintered to increase electrode/electrolyte contact area
  3. Do not require chloriding
  4. Reusable via resurfacing
  5. High stability recordings, to DC, when used with chloride salt gel electrolyte
  6. Electrolyte gel cavity reduces artifact due to electrolyte/electrode motion and minimizes electrolyte dissipation/drying over long-term recordings

Support

Applications

Downloads/Resources

Knowledge Base

Recommended Items

Spotlight On
wireless NIRS imager

fNIR Mobile Imaging Systems

High-performance mobile fNIR Imaging Systems are stand-alone functional brain imaging solutions for continuous NIR spectroscopy (NIRS). These top of the line systems provide cognitive function assessment and eliminate a great many of the drawbacks of a functional MRI. Mobile subjects are comfortable and can respond naturally in real-world situations to take a test or perform mobile […]

View All
Latest News

Neuromarketing Interview | How VR Can Improve Marketing Research

Alex Dimov, BIOPAC Sales Executive, was interviewed at the Neuromarketing World Forum by Inside Marketing to discuss how virtual reality can improve marketing research. Alex explains how VR can be used to present virtual iterations of a product to save time and money, and notes that measuring physiological responses adds lots of information for product and messaging […]

BIOPAC Launches New “Smart Amplifiers”

February 14, 2019 BIOPAC Systems, Inc. Goleta, CA USA New “Smart Amplifiers” make it easier than ever for life science researchers to get great data Fast Setup & High Performance Smart Amplifiers improve performance by amplifying the physiological signal close to the subject, which allows a high-level voltage connection to the data acquisition system and reduces noise artifact. […]

Read All
Request a Demonstration
Request a Demonstration