This inline coupler has a threaded port to fit the Galvanic Oxygen Sensor (RX301; included in TSD301) and ends that fit 22 mm smooth bore tubing (such as AFT12). The coupler is ideally suited for ventilator testing and interfaces with the patient tubing that connects to the ventilator outlet.
This inline coupler is used to ensure that the O2 sensor is exposed to full flow in breathing or ventilator circuits, as when the TSD301 is added to the Ventilator Validation Kit (VVK100-SYS) for oxygen concentration (% Oxygen) measurements—synchronized with flow cycling.
Total length 76.2 mm
Port: M16-1 tapped hole
Ends: 31.75 mm OD
Material: Delrin® Acetal Resin
Ventilator Validation System
Integrating BIOPAC Research Systems | Data Acquisition & Analysis
AcqKnowledge GUI Overview
The Dual Wireless Respiration and ECG BioNomadix module pair consists of a matched transmitter and receiver pair optimized for respiration and electrocardiogram data; record one or both signals. RSP (CH A)–measure abdominal or thoracic expansion and contraction while breathing ECG (CH B)–record electrical activity generated by the heart The high signal to noise ratio and […]
View AllBIOPAC provides researchers with a complete range of tools to gather data on heart rate variability (HRV). The following studies demonstrate just some of the ways in which HRV research benefits from the implementation of BIOPAC hardware and software solutions. PTSD and HRV Post-traumatic stress disorder (PTSD) has been associated with dysfunction of the autonomic […]
BIOPAC’s comprehensive Introductory ECG Guide addresses fundamental to advanced concerns to optimize electrocardiography data recording and analysis. Topics include: ECG Complex; Electrical and Mechanical Sequence of a Heartbeat; Systole and Diastole; Configurations for Lead I, Lead II, Lead III, 6-lead ECG, 12-lead ECG, precordial leads; Ventricular Late Potentials (VLPs); ECG Measurement Tools; Automated Analysis Routines for extracting, […]
Read All