Part #: RXCUFSEN11-MRI, RXCUFSEN13-MRI, RXCUFSEN9.5-MRI
Tail Cuff Sensor for MRI
Alternate tail cuff for the NIBP200A and NIBP250 Small Animal Tail Blood Pressure Systems—for use in MRI applications.
The body of the sensor is plastic (Delrin) and the tail sleeve is Latex.
There is an MRI fiber optic adapter between the NIBP200A/NIBP250 amplifier and the sensor.
The adapter connects to the NIPB200A/NIBP250 sensor input by a short cable.
The IR light source and IR light detector ends are connected to the sensor by 1.5 m dual-fiber optical cable.
The cuff Air outlet at the NIBP200A/NIBP250 amplifier connects to the sensor by 1.5 m plastic (Tygon) tubing.
The Tail Cuff is available in 3 diameter sizes: 9.5 mm, 11 mm and 13 mm.
Details
Support
Applications
Downloads/Resources
Knowledge Base
- * CLEANING GUIDELINES *
- About License Keys
- AC mode
- AcqKnowledge accuracy
- AcqKnowledge iLok key lost or unavailable
- Amplifier analog output signals
- Amplifier filter settings
- Arbitrary waveform stimulation
- Band-pass and band-stop filters
- BioNomadix Signal Interruption
- Calculating file sizes
- Calibration values
- Checking Finger Cuff Lifetime for NIBP100D/NIBP100D-HD
- Common mistakes/general troubleshooting
- Connecting Calibration Gas Tanks & Mixing Chambers
- Editing noisy data
- Electrodermal activity measurements
- Event Markers | Correcting Automated Placement
- Excel files exported from BIOPAC software open in Excel 'Protected View'
- Glossary of specification terminology
- Grounding guidelines
- High pass filters
- How can I move QRS peak event marks from the bottom of S waves to the top of R waves?
- Installation CD/DVD lost or damaged...how can I re-install software?
- Interfacing third-party transducers
- Low pass filters
- Notch filter
- Railing signal (flatline)
- Recording good data
- Troubleshooting MP160 Ethernet Communication
- Using other software with BIOPAC hardware
- VREF, reference excitation voltage
Stay Connected