BIOPAC® Systems, Inc. Logo

Laminar Flow Transducer ±120 LPM

Request More Info
Laminar Flow 2 LPS
Part #: TSD157B-MRI, TSD157B-MRI-01

The TSD157B-MRI laminar flow transducer (±120 LPM) is suitable for precision ventilator bidirectional airflow measurements or resting airflow measures in fMRI. It consists of flow head RX157B + pressure transducer TSD160A + Tubing. Tubing presses over the barbs on the flow head and transducer and should be cut to fit for max separation, typically 10 m for MRI or 0.5 m for non-MRI.

  • For ventilator flow measurements, the flow noise of TSD157B-MRI greatly outperforms earlier offering of TSD127 + TSD117B over the typical ventilator flow range of ±100 LPM.
  • For MRI use, the TSD157B-MRI  can go inside the bore; the tubing from the RX157B flow head goes through the waveguide to the TSD160A+DA100C in the Control Room and should be cut to fit. The TSD157B-MRI can also interface with the AFT35-MRI valve: AFT35-MRI to AFT7 tubing to AFT11E to RX157B. (This same setup also works with RX127, instead of RX157B, with an additional coupler AFT11B.)

BIOPAC supplied linearization polynomials are available on request as a template.

Additional or replacement flow heads available as RX157B. Ask about options for 60 LPM or below or 240 LPM and below.

Order with choice of 1 m tubing for non-MRI use or 20 m tubing for MRI use.

See More...

laminar airflow transducer 120 LPS
View Spec PDF

Are You Looking for These?

Part #: N/A
Categories: Airflow & Gas Analysis - Research, MRI Magnetic Resonance Imaging - Research, Transducers - Research
Subcategories: Airflow and Gas Analysis Accessories - Research, Airflow - Research

Alternatives
For the same Platform

Equivalents
With a different Platform

Details

Compatibility


TSD157B-MRI Specifications

Components: RX157B Flow head + TSD160A Differential Pressure Transducer + Tubing
Tubing length options: 1 meter (non-MRI) or 20 meters (MRI)
MRI Safe: RX157B Flow head
Type: Bidirectional Flow Measurement
Range: ±120 Liters/Min
Ports: Single Barb accepts 3.5 mm ID Tubing
Connects to Standard 22 mm ID Ventilator Tubing
Noise: Standard Deviation – 0.085 Liters/Min @ 25 LPM @ DC-10 Hz Bandwidth
Interchangeability Accuracy: ±5% (nominal)
Temperature range: 0-40 °C
Dimensions: 140 mm long x 22 mm OD x 15 mm ID
Mounting : ¼” x 20 standard female camera mount
Disinfecting: Cold Sterilization (Cidex OPA or equivalent)
Calibration, noise and accuracy data: download TSD157B to TSI4000 flow standard (xls and txt)

Flow Rate (Liters/Minute)
(Inches H2O)
20
50
100
120
Pressure Delta
RX157B
0.02
0.08
0.26
0.31

Optional Accessories

TSD157B-MRI can be used with the AFT35-MRI low-profile mouthpiece and non-rebreathing T-valve assembly and AFT7 tubing with AFT11B coupler:

AFT35-MRI_valve-interface

Videos

Ventilator Validation System

Integrating BIOPAC Research Systems | Data Acquisition & Analysis

AcqKnowledge GUI Overview

Support

Downloads/Resources

Knowledge Base

Recommended Items

Spotlight On
free BIOPAC webinar

STRESS | Measuring Related Physiological Changes

How do physiological signals change when we experience stress? How can we monitor those changes continuously so we can aim to improve our quality of life? BIOPAC will present a wide array of noninvasive and continuous measurements of stress-related physiological signals and provide in-depth guidance about best practices for recording and data analysis.

You Will Learn How To:
• Select the right measurements and obtain good data
• Choose which signals to record-including fNIRS, ECG, EDA, Respiration, Blood pressure, etc.
• Recognize the importance of each signal in the context of the stress response
• Analyze the respective signals with live examples
• Take measures best suited for short-term vs. long-term recording

LIVE WEBINAR on October 7 at 8AM PT/11AM ET

Register Now
Latest News

New Citations | Marking Events with BIOPAC

BIOPAC offers complete systems for life science research and education—human, animal, or in vivo studies, as well as powerful software and automated analysis including industry-standard data acquisition amplifiers, transducers & electrodes. BIOPAC can be used inside or outside the lab to measure physiology anytime, anyplace. Impact of Movie Editing on Perceptual Conflict Mechanisms Our ability to watch and understand films effortlessly […]

Electrocardiography Guide Now Available

BIOPAC’s comprehensive Introductory ECG Guide addresses fundamental to advanced concerns to optimize electrocardiography data recording and analysis. Topics include: ECG Complex; Electrical and Mechanical Sequence of a Heartbeat; Systole and Diastole; Configurations for Lead I, Lead II, Lead III, 6-lead ECG, 12-lead ECG, precordial leads; Ventricular Late Potentials (VLPs); ECG Measurement Tools; Automated Analysis Routines for extracting, […]

Read All
Request a Demonstration
Request a Demonstration