Compatibility
All connections can be performed with AFT11 series couplers.
Calibration, noise and accuracy data: download TSD127 to TSI4000 flow standard (xls and txt)
Low Flow Trans 90L/min
Precision Transducer for Research Data Acquisition
Convert biological signals for analysis with MP system or AcqKnowledge®
The TSD127 can perform a variety of pulmonary measurements relating to airflow, lung volume, and expired gas analysis. The transducer includes a detachable flow head (RX127) for easy cleaning and sterilization. The TSD127 is intended for low flow applications. The pneumotach airflow head (RX127) is coupled to a precision, highly sensitive, differential pressure transducer (TSD160A). The TSD127 will connect directly to a breathing circuit or plethysmogram chamber.
- For airflow and lung volume measurements, connect a short airflow cannula to the TSD127.
- For measurements of expired gases, use the TSD127 with the AFT22 non-rebreathing valve.
- For ventilator testing CPAP mode validation, the TSD127 can be added to the VVK100-SYS Ventilator Validation Kit for very low flow and unidirectional measurements (less than 50 L/min); to review specific testing requirements and recommended physical configurations for flow testing over multiple dynamic ranges, contact BIOPAC.
Are You Looking for These?
Part #: TSD127
Alternatives
For the same Platform
Equivalents
With a different Platform
Details
Support
Applications
Downloads/Resources
Knowledge Base
- * CLEANING GUIDELINES *
- About License Keys
- AC mode
- AcqKnowledge accuracy
- AcqKnowledge iLok key lost or unavailable
- Amplifier analog output signals
- Amplifier filter settings
- Arbitrary waveform stimulation
- Band-pass and band-stop filters
- BioNomadix Signal Interruption
- Calculating file sizes
- Calibration values
- Checking Finger Cuff Lifetime for NIBP100D/NIBP100D-HD
- Common mistakes/general troubleshooting
- Connecting Calibration Gas Tanks & Mixing Chambers
- Editing noisy data
- Electrodermal activity measurements
- Event Markers | Correcting Automated Placement
- Excel files exported from BIOPAC software open in Excel 'Protected View'
- Glossary of specification terminology
- Grounding guidelines
- High pass filters
- How can I move QRS peak event marks from the bottom of S waves to the top of R waves?
- Installation CD/DVD lost or damaged...how can I re-install software?
- Interfacing third-party transducers
- Low pass filters
- Notch filter
- Railing signal (flatline)
- Recording good data
- Troubleshooting MP160 Ethernet Communication
- Using other software with BIOPAC hardware
- VREF, reference excitation voltage
Stay Connected