BIOPAC® Systems, Inc. Logo

Paired Electrodes

Request More Info
Disp. paired electrode foam 25 pairs/pk
Part #: EL500, EL500-6

Fixed spacing electrode pairs—primarily used for recording nerve conduction measurements, cardiac output, electrical bio-impedance and general-purpose surface EMG measurements.

These disposable snap electrodes provide the same signal transmission as reusable electrodes, with added convenience and hygiene. Each peel-and-stick foam-backed sheet has two electrode contacts and each electrode is pre-gelled. Designed for one use only.

Use disposable snap electrodes with LEAD110 series electrode leads or any other BIOPAC lead specified for snap electrodes.

Used with NICO or EBI amplifiers for impedance cardiography (in place of discontinued EL506 strip electrodes).

See More...

Disp. paired electrode foam 25 pairs/pk
View Spec PDF

Are You Looking for These?

Part #: N/A
Categories: Electrodes - Education, Electrodes - Research
Subcategories: Disposable Electrodes - Education, Disposable Electrodes - Research

Details

Compatibility


  • Standard snap connection
  • Ag/AgCl contact (11 mm dia)
  • Incorporates gel cavity (16 mm dia x 1.5 mm deep)
  • Electrolyte: wet liquid gel (10% chloride salt)
  • Strong adhesion
  • Size: 41 mm wide x 82 mm long x 1.5 mm thick
  • Qty: 25 or 150 sheets (2 contacts per sheet)

For best performance, use shielded leads (e.g., LEAD110S) for recording electrodes and an unshielded lead (e.g., LEAD110) for the ground electrode.

Paired electrodes can be used with NICO or EBI amplifiers for impedance cardiography (in place of discontinued EL506 strip electrodes):

setups for absolute and relative Cardiac Output measures

Electrical bioimpedance setups for absolute or relative measurement

Videos

How to Apply Gel to Dry Electrodes

EL-CHECK Electrode Impedance Checker

Fundamentals of Physiological Data Recording

Support

Downloads/Resources

Knowledge Base

Recommended Items

Spotlight On
BIOPAC Evoked Response Module

ERS Smart Amplifier

The ERS Evoked Response Smart Amplifier is an extremely low noise differential amplifier that accurately amplifies very small potentials, such as those associated with stimulus/response, startle response, ABR auditory brainstem response, somatosensory evoked response, signal-averaged recordings, and nerve conduction velocity recordings. BIOPAC’s new Smart Amplifiers are designed for great data. Smart Amplifiers improve performance by […]

View All
Latest News

New Citations | BIOPAC in Ergonomics

Whether using specialized equipment, performing repetitive tasks, or simply going about our daily work routine, the effects of design in our environment as well as the tools we use and the way we use them can impact our health, work performance, and quality of life. Here are a few studies that have recorded and analyzed […]

EDA Guide Available

BIOPAC’s comprehensive EDA Guide provides an introduction to Electrodermal Activity (EDA or GSR) and details topics including: EDA Complex: SCL, SCR, tonic, phasic, specific SCR, non-specific SCR Participant Prep & Electrode Placement Data Recording tips Automated EDA Analysis Routines Digital input to Stim Events Stim-Response Analysis Derive Phasic EDA from Tonic Event-related EDA Analysis Locate […]

Read All
Request a Demonstration
Request a Demonstration