BIOPAC® Systems, Inc. Logo

Paired Electrodes

Request More Info
Disp. paired electrode foam 25 pairs/pk
Part #: EL500, EL500-6

Fixed spacing electrode pairs—primarily used for recording nerve conduction measurements, cardiac output, electrical bio-impedance and general-purpose surface EMG measurements.

These disposable snap electrodes provide the same signal transmission as reusable electrodes, with added convenience and hygiene. Each peel-and-stick foam-backed sheet has two electrode contacts and each electrode is pre-gelled. Designed for one use only.

Use disposable snap electrodes with LEAD110 series electrode leads or any other BIOPAC lead specified for snap electrodes.

Used with NICO or EBI amplifiers for impedance cardiography (in place of discontinued EL506 strip electrodes).

See More...

Disp. paired electrode foam 25 pairs/pk
View Spec PDF

Are You Looking for These?

Part #: N/A
Categories: Electrodes - Education, Electrodes - Research
Subcategories: Disposable Electrodes - Education, Disposable Electrodes - Research

Details

Compatibility


  • Standard snap connection
  • Ag/AgCl contact (11 mm dia)
  • Incorporates gel cavity (16 mm dia x 1.5 mm deep)
  • Electrolyte: wet liquid gel (10% chloride salt)
  • Strong adhesion
  • Size: 41 mm wide x 82 mm long x 1.5 mm thick
  • Qty: 25 or 150 sheets (2 contacts per sheet)

For best performance, use shielded leads (e.g., LEAD110S) for recording electrodes and an unshielded lead (e.g., LEAD110) for the ground electrode.

Paired electrodes can be used with NICO or EBI amplifiers for impedance cardiography (in place of discontinued EL506 strip electrodes):

setups for absolute and relative Cardiac Output measures

Electrical bioimpedance setups for absolute or relative measurement

Support

Downloads/Resources

Knowledge Base

Recommended Items

Spotlight On
free BIOPAC webinar

Multimodal Workload Measurements | Combining fNIRS, ECG/HRV, Eye Tracking & Stimulus Presentation

There is overwhelming evidence that combining multiple physiological measures provides greater power to discriminate mental workload as well as other cognitive states. Researchers frequently acquire disparate data streams for studies in cognition, human factors, ergonomics, user experience, and more.

Watch the online presentation to learn how to:
• Operate a multimodal experiment using: fNIRs, ECG/HRV, eye tracking, and stimulus presentation
• Record high quality data
• Optimize the setup
• Synchronize devices
• Analyze data

Register Now
Latest News

New Citations | Brain Studies Involving fNIRS, BDNF, and fMRI

BIOPAC provides software and hardware that allows research teams to study the brain for cognitive experimentation. Here are a few notable studies using BIOPAC equipment for fNIRS, fMRI, and Brain Studies research. The Mystery of our Inherent Body Clock Recording time is as easy as looking at your watch or pulling out your phone, but humans have always had […]

Electrocardiography Guide Now Available

BIOPAC’s comprehensive Introductory ECG Guide addresses fundamental to advanced concerns to optimize electrocardiography data recording and analysis. Topics include: ECG Complex; Electrical and Mechanical Sequence of a Heartbeat; Systole and Diastole; Configurations for Lead I, Lead II, Lead III, 6-lead ECG, 12-lead ECG, precordial leads; Ventricular Late Potentials (VLPs); ECG Measurement Tools; Automated Analysis Routines for extracting, […]

Read All
Request a Demonstration
Request a Demonstration