BIOPAC® Systems, Inc. Logo

Couplers

Request More Info
Airflow Couplers
Part #: AFT11A, AFT11B, AFT11C, AFT11D, AFT11E, AFT11F, AFT11H

These couplers connect a variety of air flow port IDs and ODs to transducers, tubing, filters, mixing chambers, and calibration syringes.

15 mm OD, 22 mm ID – Rigid – AFT11B
22 mm OD, 22 mm OD – Rigid – AFT11C
22 mm OD, 35 mm ID – Flexible  – AFT11E
25 mm OD, 35 mm ID – Flexible  – AFT11A
35 mm OD, 28.6 mm ID – Flexible  – AFT11H
35 mm OD, 35 mm OD – Flexible  – AFT11D
35 mm OD, 45 mm OD – Flexible- AFT11F

MRI Use: MR Safe (see Specifications for components)

See More...

Couplers for airflow hardware
View Spec PDF

Are You Looking for These?

Part #: N/A
Categories: Gas Analysis - Education, Airflow & Gas Analysis - Research
Subcategories: Tubing & Couplers - Education, Tubing & Couplers - Research

Details

Compatibility


Review the AFT11 Series Coupler Guide for port connection options:AFT11 Series Coupler Guide

 

SS11LB AIRFLOW CONNECTIONS

The SS11LB transducer uses flow head RX117A, which has multiple outer diameters to directly connect to the AFT36 mouthpiece/filter, AFT7L tubing, and other pulmonary products. The tiered airflow head has a different design than the SS11LA so different couplers are required for other BIOPAC airflow parts.

AFT Series Part #RX117A Flow Head Coupler/Combination/Notes
AFT1Direct connection to SS11LB, but not recommended due to airflow restriction; use AFT36 in place of AFT1 + AFT2.
AFT6ANot recommended for SS11LB. Use FLOWCAL calibration kit. May still be connected to the SS11LB using the AFT11A coupler included with the AFT6A.
AFT7LDirect connection to SS11LB.
AFT8 Autoclavable MouthpieceEither connect directly if sterilizing airflow head. If not sterilizing head can use AFT4 disposable filter (connect AFT8 to smaller diameter of filter, larger diameter to SS11LB).
AFT9 35mm Reusable MouthpieceReplaced by AFT8 Autoclavable Mouthpiece. The AFT8 has a better fit with the SS11LB.
AFT10 Disposable FacemaskAFT11H 35 mm OD/28.6 mm ID.
AFT12Direct connection to SS11LB. Snug, but fits in the inner diameter of airflow head.
AFT13 (OBSOLETE)AFT13 has been discontinued. Replaced by the AFT36 mouthpiece/filter.
AFT23 Low-cost T-ValveReusable mouthpiece: AFT4 + AFT8 + AFT11D 35 mm OD/35 mm ODDisposable mouthpiece:  AFT36 + AFT11D 35 mm OD/35 mm OD
AFT26 2 L syringeAFT11D 35 mm OD/35 mm OD. This coupler is included in the FLOWCAL calibration kit.
AFT36 Disposable Filter with Integrated MouthpieceDirect connection to SS11LB.

Support

Downloads/Resources

Knowledge Base

Recommended Items

Spotlight On
16-Channel DAQ with AcqKnowledge Software & Workflow License

MP160 Systems with Workflow

This research system ships with an MP160 Data Acquisition with AMI100D Module Interface and AcqKnowledge software licensed for Workflow Automation. MP160 + AMI100D provides a flexible tool for life science researchers. The modular, powerful data acquisition system can be used with BIOPAC’s amplifiers and accessories AND with equipment you already have.  To put together a system to […]

View All
Latest News

New Citations | BIOPAC in Ergonomics

Whether using specialized equipment, performing repetitive tasks, or simply going about our daily work routine, the effects of design in our environment as well as the tools we use and the way we use them can impact our health, work performance, and quality of life. Here are a few studies that have recorded and analyzed […]

EDA Guide Available

BIOPAC’s comprehensive EDA Guide provides an introduction to Electrodermal Activity (EDA or GSR) and details topics including: EDA Complex: SCL, SCR, tonic, phasic, specific SCR, non-specific SCR Participant Prep & Electrode Placement Data Recording tips Automated EDA Analysis Routines Digital input to Stim Events Stim-Response Analysis Derive Phasic EDA from Tonic Event-related EDA Analysis Locate […]

Read All
Request a Demonstration
Request a Demonstration