BIOPAC® Systems, Inc. Logo

Leads – RT for MRI

Request More Info
Clip Lead, RT, u/sh, 1.8 m
Part #: LEAD108B, LEAD108C

Use LEAD108 Series leads in MRI/fMRI environments with radiotranslucent snap electrodes, such as disposable pre-gelled EL508 or disposable dry EL509.

For MRI use, shorter leads are better. To record any biopotential signal (e.g., ECG, EMG) in MRI, short leads such as LEAD108B (15 cm) and LEAD108C (30 cm) are recommended; do not use 2-meter or 1-meter leads for biopotential signals in MRI.

See BIOPAC MRI Guidelines for details.

MRI Use: Conditional to 9T

Condition: Up to 9T, any scanning sequence, use with EL508 or EL509 MRI/RT electrodes only. (See Specifications for components.)

See More...

BIOPAC data acquisition
View Spec PDF

Are You Looking for These?

Part #: N/A
Categories: Electrodes - Research
Subcategories: Leads - Research

Details

Compatibility


Lead length when recording in MR environments is critical. Lead lengths must be kept much shorter than the wavelength of the Larmor frequency (42.6 MHz/T). For a 3T machine, this is the speed of light divided by (42.6*3*1E6) or 2.34 meters. As field strengths increase, then lead lengths should continue to shorten.

Videos

BIOPAC Research Solutions | EMG

Support

Applications

Downloads/Resources

Knowledge Base

Recommended Items

Spotlight On
Ventilator Validation Kit

Ventilator Validation and Test Equipment

The Ventilator Validation Kit supports new prototype development, existing design validation for production testing, mobile field testing and verification, and other uses where accurate pressure and flow measurements are critical. The Ventilator Validation Kit provides ventilator manufacturers and prototype developers with a complete solution for validating new medical/hospital-grade ventilator products intended for human use. The VVK100-SYS includes […]

View All
Latest News

Researchers Respond | iSAVE: Rapidly deployable system to expand ventilator capacity

MIT and Harvard researchers developed a new technique to expand ventilator capacity Individualized System for Augmenting Ventilator Efficacy (iSAVE): A Rapidly deployable system to expand ventilator capacity “The iSAVE is a rapidly deployable solution in response to the urgent shortage of mechanical ventilators for respiratory support during the COVID-19 pandemic. In contrast to previously described […]

New Ventilator Validation Kit for Rapid Development & Field Testing

New Ventilator Validation System Allows Device Manufacturers to Test Ventilator Pressure and Volume System supports rapid development and testing of hardware for COVID-19 treatment Goleta, California – March 24, 2020 BIOPAC Systems, Inc. announced a new Ventilator Validation System for engineering and device manufacturers to use when designing and testing new and existing ventilators for […]

Read All
Request a Demonstration
Request a Demonstration