BIOPAC® Systems, Inc. Logo

Gas Sampling Tubing+Luer for MRI

Request More Info
Tubing and M/F Luer Locks: 3.175 mm, 10 m for MRI
Part #: AFT31-MRI

Tubing plus drying tubes, hydrophobic filters, and male and female Luer locks to interface the AFT35-MRI T-valve gas sampling port to the CO2100C module and/or the O2100C module.

  • Tubing: 3.175 mm ID; 10 m long crack-resistant polyethylene
  • Drying tubes: Nafion® tubing x 2
  • Filters: 17 mm 45 micron hydrophobic filter x 2
  • “Y” connector gas sampling interface adapter to allow simultaneous use of CO2100C and O2100C modules
  • Delay, assuming 100 ml/min gas sampling flow rate: will be 47.1 sec

MRI Use: MR Safe (see Specifications for components)

See More...

Tubing + M/F Luer Locks: 3.175 mm, 10 m for MRI
View Spec PDF

Are You Looking for These?

Part #: AFT31-MRI
Categories: MRI Magnetic Resonance Imaging - Research
Subcategories: Airflow and Gas Analysis Accessories - Research

Details

Compatibility


Use of Nafion Drying Tubes and Hydrophobic Filters is optional but highly recommended to prevent moisture buildup.

Replacement Nafion Drying Tubes (RX-AFT20-NAFION) should be used when tubing becomes discolored, and Hydrophobic Filters (RX-AFT20-FILTER) should be replaced monthly.

Sample Setups

End Tidal CO2 Setup

C02100C amp + AFT31-MRI tubing + AFT35-MRI breathing kit

Airflow & Lung Volume with End Tidal CO2 Setup

DA100C + MECMRI-DA + TSD117A-MRI + AFT11A + AFT7-L + AFT35-MRI + AFT31-MRI + CO2100C

Metabolic Setup

MECMRI-DA + DA100C + TSD117A-MRI transducer + AFT11A + AFT7-L + to add End Tidal (AFT35-MRI + CO2100C)+ AFT15A/B + C02100C + O2100C + AFT31-MRI tubing + AFT7 + AFT11A

BIOPAC MRI Airflow Hardware

Support

Applications

Downloads/Resources

Knowledge Base

Recommended Items

Spotlight On
Ventilator Validation Kit

Ventilator Validation and Test Equipment

The Ventilator Validation Kit supports new prototype development, existing design validation for production testing, mobile field testing and verification, and other uses where accurate pressure and flow measurements are critical. The Ventilator Validation Kit provides ventilator manufacturers and prototype developers with a complete solution for validating new medical/hospital-grade ventilator products intended for human use. The VVK100-SYS includes […]

View All
Latest News

New Citations | Respiration Analysis and More

Comparing Diaphragm Tissue Between Healthy and Ill Patients The human diaphragm is one of the primary muscles used in respiration, contracting and expanding to control breathing. To measure how much diaphragms move for critically ill patients (in an Intensive Care Unit) compared to diaphragms in a healthy subject, patients at “Papageorgiou” General Hospital in Thessaloniki, […]

BIOPAC Systems Helps STARK Industries Launch VITAL Ventilator for NASA JPL

BIOPAC’s ventilator testing equipment and expertise supports STARK Industries’ effort to manufacture, validate, and test NASA JPL’s VITAL Ventilators Goleta, California – June 16, 2020 BIOPAC Systems, Inc. announced a partnership with STARK Industries, LLC to provide ventilator validation and testing equipment for the mass production of ventilators. STARK Industries was awarded a global license […]

Read All
Request a Demonstration
Request a Demonstration