BIOPAC® Systems, Inc. Logo

Fast Response Thermistor for MRI

Request More Info
Part #: TSD202A-MRI

TSD202A-MRI employs a fast response thermistor and is appropriate for use in locations where temperature changes rapidly, as with the temperature changes of inspired/expired breath (not designed for liquid immersion). Interface with the MECMRI-TRANS cable-filter set to SKT100C.

For measuring skin (surface) temperature, simply tape the TSD202A-MRI to the location of interest.

For measuring airflow rate resulting from respiration, place the TSD202A-MRI next to the mouth or nose so that inspired or exhaled air will intercept the tip of the transducer.

  • Response time: 0.6 sec
  • Dimensions: 1.7 mm (dia) x 5 mm (long)
  • Replacement sensors available: RX202A-MRI

MRI Use: Conditional to 7T

  • Condition: Apply the TSD202A-MRI thermistor so that just the sensor portion is in contact with the skin. The insulated, conductive wire portion is typically routed away from the skin by sliding a piece of gauze, or cloth, between wire and the skin surface, prior to taping the transducer to the skin.   

Temperature transducer for MRI
View Spec PDF

Are You Looking for These?

Part #: TSD202A-MRI
Categories: MRI Magnetic Resonance Imaging - Research
Subcategories: Transducers - Research

Alternatives
For the same Platform

Equivalents
With a different Platform

Recommended Items

Spotlight On
Ventilator Validation Kit

Ventilator Validation and Test Equipment

The Ventilator Validation Kit supports new prototype development, existing design validation for production testing, mobile field testing and verification, and other uses where accurate pressure and flow measurements are critical. The Ventilator Validation Kit provides ventilator manufacturers and prototype developers with a complete solution for validating new medical/hospital-grade ventilator products intended for human use. The VVK100-SYS includes […]

View All
Latest News

Researchers Respond | iSAVE: Rapidly deployable system to expand ventilator capacity

MIT and Harvard researchers developed a new technique to expand ventilator capacity Individualized System for Augmenting Ventilator Efficacy (iSAVE): A Rapidly deployable system to expand ventilator capacity “The iSAVE is a rapidly deployable solution in response to the urgent shortage of mechanical ventilators for respiratory support during the COVID-19 pandemic. In contrast to previously described […]

New Ventilator Validation Kit for Rapid Development & Field Testing

New Ventilator Validation System Allows Device Manufacturers to Test Ventilator Pressure and Volume System supports rapid development and testing of hardware for COVID-19 treatment Goleta, California – March 24, 2020 BIOPAC Systems, Inc. announced a new Ventilator Validation System for engineering and device manufacturers to use when designing and testing new and existing ventilators for […]

Read All
Request a Demonstration
Request a Demonstration