Do-it-yourself, custom transducer connector interface kits
TCIKITC 5 pin – 1.5 mm Touchproof female pins
- Use to connect non-BIOPAC electrodes and transducers directly to BIOPAC biopotential or transducer amplifier modules—except DA100C or DA100A. Color-coded wires are soldered to each of the five input sockets (Shield, Vin+, GND, Vin-, Shield).
TCIKIT 7 pin – 2 mm male pins
- Use for DA100C or DA100A. Kit includes housing, PC board with 7 attached PIN plugs (2 mm) and instructions, and is partially assembled; mount a connector to the housing and solder wires to the pin.