SKT Smart Amplifier

AcqKnowledge Software Smart Amp detection

Case holds Smart Amp and clipping accessories

Part #: SKT100D

The SKT Skin Temperature Smart Amplifier is specifically designed for recording signals from a thermistor transducer to measure surface or air temperature.

BIOPAC’s new Smart Amplifiers are designed for great data. Smart Amplifiers improve performance by amplifying the physiological signal close to the subject, which allows a high-level voltage connection to the data acquisition system and reduces noise artifact.

AcqKnowledge Smart Amp setup includes guides and prompts to prevent errors. Plus, channels are automatically set to be plotted and included in input values display, with the initial visual range set to the min/max input range for that Smart Amplifier signal type, in appropriate units.

Connect to a BN-TEMP-A-XDCR or BN-TEMP-B-XDCR thermistor transducer from the proven BN Series of accessories.

The Smart Amplifier may be attached to the subject either using the included Velcro backed clip or optional Velcro straps around the subject. The amplifier terminates with a 3 m long cable and connects to the AMI100D Amplifier Input Module.

View Spec PDF

Are You Looking for These?

Part #: SKT100D

Categories: Smart Amplifiers - Research, Amplifiers - Research
Subcategories: Transducer Amplifiers - Research

Alternatives
For the same Platform

Details

Compatibility

MP160 Research System with AMI100D

Reduced wiring in Smart Amp setups reduces ambient and common mode noise, increases comfort, and improves the group dynamic!

Smart Amplifiers connect to an MP160 Research System via an Amplifier Interface Module (AMI100D); Smart Amps are not compatible with MP150, MP100, HLT100C, or MP36R devices. For output, add CBL237 with OUTISO or similar. AcqKnowledge Smart Amp setup includes guides and prompts to prevent errors. Plus, channels are automatically set to be plotted and included in input values display, with the initial visual range set to the min/max input range for the Smart Amplifier signal type, in appropriate units. AcqKnowledge 5.0.4 and above support Smart Amp functionality.

AcqKnowledge Smart Amp setup Auto-detect signal type & offer derived measures

Green: configured & detected

Red: configured but not found

White: available

Dashed: unavailable—in use by another analog input

For quick access to Smart Amp options, click the CH# box.

Use with:

Thermistor Transducer

BN-TEMP-A-XDCR standard
BN-TEMP-B-XDCR fast response

Mini-pinch leads, two-lead or three-lead in 15 cm, 30 cm, or 45 cm

BN-EL15-LEAD2BN-EL30-LEAD2 BN-EL45-LEAD2
BN-EL15-LEAD3 BN-EL30-LEAD3 BN-EL45-LEAD3

Touchproof adapters, 15 cm, sockets accept TP leads

BN-ADAPT-TP2 (+,-) BN-ADAPT-TP3 (+. -, GND)

Electrodes: vinyl or cloth, pre-gelled or dry

EL500 series disposable electrodes

Videos

Integrating BIOPAC Research Systems | Data Acquisition & Analysis

Automated ECG Analysis- Lead II

BIOPAC Research Solutions | ECG

Classify Heartbeats

EL-CHECK Electrode Impedance Checker

Marking and Interpolating Segments

Support

Downloads/Resources

BIOPAC Great ECG Data

Research

Education

Human Insights

Applications

Core Disciplines

Human Insights

Resources

Support

SKT Smart Amplifier