Used to verify the calibration of the any of the 100C series Biopotential amplifiers. This cable (1.8m) connects between the amplifier input and the UIM100C D/A output 0 or 1. Create a stimulus signal using AcqKnowledge and monitor the output of the amplifier connected to the Calibration Cable. This procedure can verify the amplifier's frequency response and gain settings. The Calibration Cable incorporates a precision 1/1000 signal attenuator. (Amplifier specification tests are performed at the factory before shipping, but your own Calibration Cable can ensure peace of mind by permitting precise frequency response and gain calibrations for exact measurements.)
You might also be interested in the following items:
)
