BIOPAC® Systems, Inc. Logo

Voltage Stimulators

The Gold Standard for Life Science Instruction

Stimulation for Biopac Student Lab®

Request More Info
Voltage Stimulator for BSL MP36/35
Part #: BSLSTMB, BSLSTMA

The Voltage Stimulator connects to either the MP36/MP35 or the MP30. BNC output provides compatibility with a variety of stimulator cables. The voltage Range and Level are manually controlled while the pulse timing is user-adjustable and controlled by the Biopac Student Lab software.

The Voltage Range (.025-10 Volts or .12-100 Volts) is established by a switch with a removable key. The Level is set using the knob and digital readout on the front panel. The Reference Output cable connects to any of the MP input channels for simultaneous recording of the stimulator output. A switch on the front panel allows the Reference pulse width to be “Fixed (15 ms)” so it can be recorded even when the sample rate is lower than the output pulse width.

See More...

MP356/35 Voltage Stimulator 100V
View Spec PDF

Are You Looking for These?

Part #: N/A
Categories: Stimulation - Education
Subcategories: Stimulators - Education

Alternatives
For the same Platform

Details

Compatibility


A control panel in the BSL PRO software allows for precise control of the number of pulses (select 1-254 or continuous), pulse width and pulse repetition (frequency). Pulse width and repetition can be changed “on the fly.” The stimulator can be set to start with the recording or manually at any time. Parameter limits can be established and Event markers can be activated to indicate when a change in pulse output occurs.

The stimulator can be used for the following physiological measurement protocols:

  • Twitch sub-threshold
  • Twitch threshold
  • Maximum twitch responses
  • Single twitch, summation
  • Tetanic contraction
  • Muscle tension/length versus force
  • Fatigue
  • Nerve conduction velocity

Stimulation electrodes:

  • HSTM01 Human-safe Handheld Stimulation Electrode
  • ELSTM2 Needle Electrode

Stimulation cables:

  • Nerve chamber cables: BSLCBL1A, BSLCBL2A, BSLCBL3A, and BSLCBL4B
  • Clip cables: BSLCBL7, BSLCBL11, and BSLCBL12
WARNING
Like all stimulating devices, the BSLSTM stimulator can be dangerous–please follow all stimulation safety guidelines!
  1. When powering ON the BSLSTM stimulator and/or the MP36/35 unit, follow this procedure for maximum safety: Connect the Trigger and Reference Output cables from the BSLSTM to the MP36/35 unit.
  2. Turn the MP36/35 unit ON.
  3. Launch the BSL PRO Software.
  4. Click on the MP36/35 menu and select Output Control>Stimulator.
  5. Turn the Level knob on the BSLSTM to 0 volts (fully counter-clockwise).
  6. Flip the BSLSTM Power switch ON.
  7. Attach the Output from yhe BSLSTM to the subject.
  8. Turn the Level knob to the desired initial output level.
  9. Click on the “START” button in the BSL PRO software to start acquiring data — Preferences may be set to start stimulation with start of acquisition or with the switch in the Stimulator output Control window.
  10. Incrementally adjust the Level for the desired Output.
  11. When you have completed recording and taken the required measurements, turn the Level back to 0 volts.

Support

Downloads/Resources

Knowledge Base

Recommended Items

Spotlight On
NIRS Experiment License

fNIRS Lesson License

Add fNIRS Lessons to a C Series Imager Record NIRS measurements from the forehead and the forearm at two wavelengths, 730 nm for deoxy-Hb and 850 nm for oxy-Hb. Students embark on real-world NIRS research using a student-friendly approach in these four guided lessons covering nine experiments. COBI Modern makes NIRS experimentation easy for students […]

View All
Latest News

New Citations | BIOPAC in EDA Research

Researchers utilize electrodermal activity (EDA) data in a wide array of protocols. These recent studies join thousands of BIOPAC citations for EDA and represent just a few of BIOPAC’s hardware options for wired, wireless, logged, or MRI protocols with reusable or disposable EDA accessories and AcqKnowledge software solutions for Automated EDA Analysis Routines and EDA Measurement Tools. Caffeine Delivery […]

EDA Guide Available

BIOPAC’s comprehensive EDA Guide provides an introduction to Electrodermal Activity (EDA or GSR) and details topics including: EDA Complex: SCL, SCR, tonic, phasic, specific SCR, non-specific SCR Participant Prep & Electrode Placement Data Recording tips Automated EDA Analysis Routines Digital input to Stim Events Stim-Response Analysis Derive Phasic EDA from Tonic Event-related EDA Analysis Locate […]

Read All
Request a Demonstration
Request a Demonstration