Acupuncture and Rheumatoid Arthritis: Researchers from University of Porto aimed to get results of the effect of acupuncture, as a treatment to Rheumatoid arthritis (RA) condition, and examine the benefits on…
Search
Use this DSUB9 to RJ11 jack Output Adapter to map the analog output of an MP36 or MP36R to an RJ jack; allows stimulators designed with HLT-compatible connections to be…
If you have any questions about policies or procedures, please contact BIOPAC: Tel 805-685-0066 | Fax 805-685-0067 | E-mail info@biopac.com | www.biopac.com TECHNICAL SPECIFICATIONS All technical specifications are subject to change without…
+12 V, 1.25 amp Use from MP to mains wall outlet. One power supply is included with each MP36/35/30 System or MP100 System. Specify power cord: * ACCORD-US (US) *…
Includes this hardware: SuperLab System STP35W includes SuperLab 6 includes SuperLab to MP3X cable includes M-POD event mark to I/O port (DB25 connector) includes Response Pad Noninvasive Cardiac Output Sensor SS31LA includes…
EDA Questions and Answers Your colleagues submitted these questions during BIOPAC EDA Webinars. Topics include EDA Recording Systems Recording EDA in the MRI EDA Markers Temporal Factors and EDA Stimulation and EDA…
With assistance from a UCSB Instructional Improvement Mini-Grant, the Sherman Lab at UC Santa Barbara produced a video for Psychology 150L: Laboratory in Social Psychology on using the psychophysiology equipment in…
Humans, much like animals, separate themselves into different social hierarchies often associated by some specific sort of status signal. While animals may assign hierarchies strictly through physiological measures, the Biosocial…
This DSUB9 to 3.5 mm mono jack interface allows the MP36/MP36R to be used with the STMISOLA Isolated Linear Stimulator for arbitrary stimulus output. The 1 m interface connects the MP36/MP36R Analog Out…
The STP35 Interface Cable connects SuperLab to an MP36/35 Biopac Student Lab System unit or MP36R Research System unit. The STP35 cable interfaces with the I/O port of the rear…
The STP35W is a stand-alone system that measures subject responses to visual or auditory stimuli. Includes SuperLab current release, c-pod, and response box. SuperLab – present visual stimuli on a…
The BSL System employs a wide array of transducers that transform physical measures into electrical signals. The generic input design of the MP36/35 acquisition unit allows it to interface a…
On the MP100/MP150: For unipolar recording you need as many amplifiers as you have sites to record from. For example, for 16 electrodes (not including 1 reference and 1 ground),…
Upgrade your Biopac Student Lab System to MP36A hardware and current Biopac Student Lab software. Upgrade components: New MP36A data acquisition unit: Increased performance (24-bit A/D converter) Built-in Low Voltage…
USB drivers for BIOPAC hardware are Microsoft certified and meet the USB communication standards at the time the hardware platform was released. Under Windows XP and above, USB drivers are broadcast…
The BIOPAC Hardware Application Program Interface (BHAPI) can be used if the hardware in question is an MP160, MP150, MP36R, MP36, or MP45. The BHAPI is a set of dynamically linked…
Microsoft-certified driver updates are now available online for the MP36, MP35 and USB1W running on Windows XP and Windows Vista. See Support > Downloads for driver options. AcqKnowledge and Biopac…
WHAT'S NEW
Biology research covers a wide variety of studies all aiming to understand living organisms...
Stay Connected