Servo Specifications
- Control System: +Pulse Width Control 1500 µsec Neutral
- Required Pulse: 3-5 Volt Peak to Peak Square Wave
- Operating Voltage: 4.8-6.0 Volts
- Operating Temperature Range: -20 to +60 °C
- Operating Speed (4.8 V): 0.21 sec/60° at no load
- Operating Speed (6.0 V): 0.16 sec/60° at no load
- Stall Torque (4.8 V): 3.3 kg.cm (45.82 oz/in.)
- Stall Torque (6.0 V): 4.1 kg.cm (56.93 oz/in.)
- Operating Angle: 45 Deg. one side pulse traveling 400 µsec
- 360 Modifiable: Yes
- Direction: Clockwise/Pulse Traveling 1500 to 1900 µsec
- Current Drain (4.8 V): 8 mA/idle and 150 mA no load operating
- Current Drain (6.0 V): 8.8 mA/idle and 180 mA no load operating
- Dead Band Width: 8 µsec
- Motor Type: 3 Pole Ferrite
- Potentiometer Drive: Indirect Drive
- Bearing Type: Dual Oilite Bushing
- Gear Type: Nylon
- Connector Wire Length: 300 mm (11.81 in)
- Dimensions: See Schematics
- Weight: 45.5 g (1.6 oz)
Gripper Specifications
- Max clamp width: 3.3 cm 1.3″
- Size: 57 x 65 x 30 mm (2.24″ x 2.56″ x 1.18″)
- Weight: 25 g
Part #: BSL-GRIPKIT
Stay Connected