BioHarness Firmware Upgrade

BioHarness Firmware Upgrade to v2.0.0.14 NOTE      –  The BioHarness will not be harmed if it is subjected to the upgrade process more than once. –  The BioHarness will not lose any data contained in the BioHarness during the upgrade process.   9700.0054  

BioNomadix Logger Firmware Update

BioNomadix Logger Firmware 0.1.60411 (April 4, 2016) adds the following functionality: Add external setup mode to allow date/time/timezone to be synchronized to a computer Extend timestamps in log files to second level accuracy (BNDL-66) Display GMT/Zulu time on timezone adjustment screen Logger firmware is compatible with BioNomadix Transmitters with 4.0, 4.1 and 4.3 firmware. Logger […]

BSL – Switch Hardware (MP36-MP35-MP30)

For BSL 3.7.2 or BSL 3.7.3 under Windows XP or Vista This utility will allow users to easily switch between multiple Biopac Student Lab hardware options (MP36, MP35, or MP30) on a single computer. The utility requires that each hardware unit (MP36, MP35, or MP30) that might be selected has been installed, connected, and recognized by […]

BSL 3.7.5 Windows L02 EMG II filter setting

This Biopac Student Lab 3.7.5 Lesson 2 script update sets a 60 Hz or 50 Hz Notch filter (based on the Line Frequency setting). The filter is currently set to 0 Hz, which may result in a very “noisy” signal under certain conditions because there is no filter to knock out induced interference from wall […]

BSL 3.7.6 for Mac – What’s New

BSL 3.7.6 for Mac installs BSL Lessons 3.7.6 and BSL PRO 3.7.3. This release updates lesson channel numbers (from the ordering used in BSL 3.7.3) to match the new MP45 two-channel system so labs can have a mix of data acquisition units: o Channels switched in L01, L02, L03, L04, L05, L06, L10, L12, L13, L17 […]

BSL Analysis Only – 3.0.7 English – Mac OS

Previous Release—Use only if you cannot update to current release. To analyze Biopac Student Lab data files on a computer without an MP3X data acquisition unit connected, use this software download (4 MB). The download will install an analysis-only version of the software, which will allow you to use the Review Saved Data (RSD) tools. […]

BSL Analysis Only – 3.6 English – Mac OS

Previous Release – Use only if you cannot update to current release BSL 3.6.6.1: To analyze Biopac Student Lab data files on a computer without an MP3X data acquisition unit connected, use this software download (13 MB). The download will install an analysis-only version of the software, which will allow you to use the Review […]

BSL Analysis Only – 3.7 English – Mac OS X

To analyze Biopac Student Lab data files on a computer without an MP3X or MP45 data acquisition unit connected, use this software download (12 MB). The download will install an analysis-only version of the software, which will allow you to use the Review Saved Data (RSD) tools. You cannot acquire data with this version. This […]

BSL Analysis Only – 3.7 English – Mac OS X 10.3

To analyze Biopac Student Lab data files on a computer without an MP3X or MP45 data acquisition unit connected, use this software download (13 MB). The download will install an analysis-only version of the software, which will allow you to use the Review Saved Data (RSD) tools. You cannot acquire data with this version. This […]

Next