BIOPAC® Systems, Inc. Logo

Cardiovascular Hemodynamics

Modular construction...extreme flexibility

MP systems offer features to support nearly every physiological recording scenario. The following advanced features apply to the application you selected.

If you don't see an Advanced Feature that interests you, please contact BIOPAC so we can identify the best solution for your particular need.

Automate Acquisition Protocols

If you need to measure response times or start data collection only after some event has occurred, the MP System allows you to trigger an acquisition in a number of different ways. You can trigger on the level of a signal, or with an external synchronizing trigger. Automatically trigger preprogrammed trials to record the data […]

Automated ECG Analysis

AcqKnowledge provides a fully-automated ECG analysis system. The software automatically identifies and labels the points of the ECG complex. It also calculates the amplitudes and timing intervals and pastes the results either into the Journal file or Excel® (see table below).

Automated Noninvasive Blood Pressure – Human

The NIBP100D Noninvasive Blood Pressure System automatically records noninvasive blood pressure. The NIBP100D system attaches to the fingers of a human subject to output a continuous noninvasive arterial pressure (CNAP) signal. The system will work for short and long-term studies that demand several hours of monitoring. Combine the blood pressure signal with a variety of […]

Automatic Data Reduction Using Epoch Analysis

Use the powerful Epoch Analysis data reduction function to reduce large (24-hour) data files to manageable sizes. Analyze both primary signals (such as arterial blood pressure) and derived data (such as Systolic BP). Extract basic measurements from fixed width segments of data. Set “epoch” width to any time interval and key off of scored event […]

Automatically Control Other Equipment

The MP System will interface with a wide variety of devices such as pumps, valves, stimulators and switches. The MP System has 16 digital I/O lines that can be manually or automatically controlled with the AcqKnowledge® software. By using the on-line Calculation and Control channel functions it’s possible to automatically trigger devices to turn on […]

Blood Flow

Interface with an array of flow meters including ultrasonic, electromagnetic, and the LDF100C Laser Doppler Flow module. The software will provide beat-by-beat, on-line analysis for acute, chronic and in-vitro preparations. Take full advantage of the data reduction features in AcqKnowledge to summarize large data files. Pulsatile flow max Pulsatile flow min Mean flow Cardiac output […]

Blood Pressure

AcqKnowledge® provides a fully automated blood pressure analysis system plus the ability to view a variety of blood pressure parameters in realtime. The software can record continuously for short- and long-term single- and multi-animal studies (24+ hours), or pre-program to record for specific time periods and dosing schedules. It provides a detailed, beat-by-beat analysis of […]

Blood Pressure Analysis

AcqKnowledge extracts various cycle-by-cycle measures from arterial blood pressure (ABP) and ECG signals. Use an NIBP100D Noninvasive Blood Pressure system, or other, continuous blood pressure amplifier to record blood pressure, or use a catheter to record direct arterial blood pressure. The software can measure Systolic BP (SBP or PSys), Diastolic BP (DBP or PDias), Mean […]

Cardiac Output Estimate from BP

This automated routine estimates cardiac output from an arterial BP signal when no cardiac output signal is available. The routine uses a single continuous ABP signal recorded by an NIBP unit (NIBP100D). The blood pressure signal is classified according to specified hemodynamic preferences and examined for systolic (syst) and diastolic (dias) Events. Individual blood pressure […]

Create Standard Operating Procedures

Save customized algorithms and display settings to a Template file. Tailor the menu displays by removing options and use the Journal to display specific procedural instructions for standard operating procedures.

Spotlight On
free BIOPAC webinar

fNIRS Data Analysis

In this fNIRS training, you will see a typical analysis workflow for fNIRS data in experiments featuring both event-based and continuous stimulation. Learn about a powerful yet easy-to-use software package with both a graphical user interface and scripting capability (for automation).

What You Will Learn:
• Preparing data for analysis
• Signal conditioning, noise removal, and managing artifacts
• Best practices for visualizing recorded data
• Block analysis using event markers and/or time
• Further temporal and spatial processing of data, including cell-by-cell processing
• Automation of analysis procedures
• Performing common statistical comparisons (t-test, ANOVA)
• Spatial visualization
LIVE Webinar Aug 25th 8am PT/11am ET

Register Now
Latest News

New Citations | BIOPAC in EDA Research

Researchers utilize electrodermal activity (EDA) data in a wide array of protocols. These recent studies join thousands of BIOPAC citations for EDA and represent just a few of BIOPAC’s hardware options for wired, wireless, logged, or MRI protocols with reusable or disposable EDA accessories and AcqKnowledge software solutions for Automated EDA Analysis Routines and EDA Measurement Tools. Caffeine Delivery […]

EDA Guide Available

BIOPAC’s comprehensive EDA Guide provides an introduction to Electrodermal Activity (EDA or GSR) and details topics including: EDA Complex: SCL, SCR, tonic, phasic, specific SCR, non-specific SCR Participant Prep & Electrode Placement Data Recording tips Automated EDA Analysis Routines Digital input to Stim Events Stim-Response Analysis Derive Phasic EDA from Tonic Event-related EDA Analysis Locate […]

Read All
Request a Demonstration
Request a Demonstration