Calibration
Calibration components and Accessories
BIOPAC provides researchers with a variety of airflow and gas analysis calibration devices and accessories, suitable for research in physiology, exercise physiology, pulmonary function, and other research areas or experiments where calibration of airflow and gas analysis equipment is required. Calibration syringes (600 ml and 2 L), calibration gas, and regulator for calibration gas are offered. These airflow and gas analysis calibration devices are components of a complete data acquisition and analysis system when used with BIOPAC airflow and gas analysis transducers, AcqKnowledge software, the MP data analysis and acquisition hardware platforms, amplifiers and other system elements.
Cal Gas: 4% CO2, 16% O2
Part #: GASCAL
Use this Calibration Gas Cylinder with BIOPAC Gas Analysis Modules. Composition: 4% Carbon Dioxide, 16% Oxygen, balance Nitrogen Cylinder Type:…
Cal Gas: 8% CO2, 21% O2
Part #: GASCAL2
Use this Calibration Gas Cylinder as the second calibration gas when calibrating the GASSYS3 chamber. Composition: 8% Carbon Dioxide, 21%…
Cal. Syringe, 3 liter
Part #: AFT27
The AFT27 3.0 Liter Calibration Syringe is certified to have a volume that meets or exceeds an accuracy of 0.5% of…
Cal. Syringe, 600 ml
Part #: AFT6A
Medium pump syringe used for injecting a precise volume of air (600 ml) through airflow assemblies for precise calibration. The…
Calibration Chamber for GASSYS3
Part #: RX-GAS3
This is a short chamber that is used when performing calibration of the GASSYS3 Gas Analysis module. The large chamber…
Calibration Kit for SS11LB
Part #: FLOWCAL
Optional calibration/validation kit Use FLOWCAL to validate factory calibration of the SS11LB. This kit connects the syringe to the SS11LB, coupler,…
Regulator Barb Interface GASSYS3
Part #: AFT17
Use this Regulator Barb Interface with Luer lock to connect a regulator (such as GASREG) and GASCAL or GASCAL2 calibration…
Regulator Barb Interface Kit
Part #: AFT16
Use the Regulator Barb Interface Kit to interface the GASCAL+GASREG calibration gas combination to an AFT15 mixing chamber to calibrate…
Regulator for GASCAL
Part #: GASREG
Use this non-corrosive, two stage regulator with flow control with GASCAL Calibration Gas Cylinder: 4% CO2, 16% O2 or the…
