The wide range of human and animal physiology experiments provide a powerful tool for teaching students the best technique and methodology for making a measurement or performing a therapy. Each experiment demonstrates fundamental physiological concepts and educates students in the setup, recording and analysis process. Physiology basics are clearly explained.
|Nerve Conduction Chambers||This acrylic, desktop Nerve Conduction Chamber has 15 stainless steel pins for recording and stimulating a variety of different nerve preparations. Each stainless steel pin is spaced 5 mm apart to provide a variety of recording and stimulating configurations. The sockets accept 2 mm plugs and interface with the BSLCBL2A stimulation cable and the BSLCBL4B…|
|High Impedance Cables||Micro-electrode interface cables for MP36/36R, MP35, MP30, or MP45* These fully-shielded, unity gain, high-impedance, differential input, electrode interface cables permit high resolution recording of biopotential signals. These interface cables incorporates dual ultra-high impedance buffer amplifiers (one for Vin+ and one for Vin-) to allow for connections to needle electrodes, wire electrodes, or very small surface electrodes…|
|Voltage Stimulators||The Voltage Stimulator connects to either the MP36/MP35 or the MP30. BNC output provides compatibility with a variety of stimulator cables. The voltage Range and Level are manually controlled while the pulse timing is user-adjustable and controlled by the Biopac Student Lab software. The Voltage Range (.025-10 Volts or .12-100 Volts) is established by a switch with…|
|Lead set, shielded, BSL||This fully-shielded cable assembly permits high resolution recording of biopotentials using our EL500 series disposable electrodes. The 2 meter adapter is terminated with standard pinch connectors to interface with EL500 series snap electrodes. The SS2LB interfaces with Biopac Student Lab data acquisition units (MP3X or MP45) and the MP36R research unit. Compatible releases BSL Lessons…|
|Low Voltage Stimulator, BSL MP35||Use the low voltage stimulator with any electrode or lead with a BNC connector (such as needle electrodes or clip leads) for direct stimulation of animal or tissue preps. Control the stimulus with the Output Control option of the BSL PRO software. Monitor the output directly on the computer without any external cable. Interface options:…|
|Noninvasive Cardiac Output Sensor - MP3X||The SS31LA simultaneously measures Impedance Magnitude (Zo; labeled “Z” on the module) and Derivative of Impedance Magnitude (dZ/dt; labeled “DZ” on the module). The SS31LA noninvasively records the parameters associated with Cardiac Output measurements. Measure changes in Cardiac Output under a variety of conditions: laying down, sitting up, standing up, and post-exercise. Use the Kubicek…|