Gas Analysis – Biology
Students can use the new gas analysis system to monitor expired CO2 and O2 levels for detailed metabolic studies with human and animal subjects. Take measures to study ventilation and heat exchange. Use the dissolved O2 probe and lesson to measure the oxygen consumption of a goldfish. Chambers, facemasks, and tubing accessories provide setup options for any protocol.
Hardware
| Name | Description | Cart |
|---|---|---|
| Disposable Bacterial Filters | Disposable bacteriological filters for use with 22 mm breathing circuits, such as BIOPAC pneumotach transducers SS11LA, TSD117, or SS11. These filters remove airborne bacteria. Pore size—VFE: 3.1 micron; BFE: 2.8 micron MRI Use: MR Safe (see Specifications for components) | $48.00 - $745.00Select options |
| Disposable Mouthpiece | These mouthpieces connect to the TSD117 pneumotach transducer and other 22 mm breathing circuits. Connects directly to the AFT1 bacterial filter, AFT22 non-rebreathing T valve (via AFT11C) and the TSD117 air flow transducer. (Pkg. 10 or 250) MRI Use: MR Safe (see Specifications for components) | $17.00 - $182.00Select options |
| Disposable Noseclip | These nose clips gently squeeze the nostrils shut to prevent errors when using mouth-breathing circuits. Available in packs of 10 or 250. MRI Use: MR Safe (see Specifications for components) | $19.00 - $242.00Select options |
| Cal. Syringe, 600 ml | Medium pump syringe used for injecting a precise volume of air (600 ml) through airflow assemblies for precise calibration. The AFT6A fits (ridged) 27 mm OD, 30 mm OD, and 15 mm ID. Fits directly to AFT13 (30 mm) filter and mouthpiece AFT23 (27 mm) non-rebreathing T-valve with replacement valves Use coupler AFT11A to connect… | $198.00Add to cart |
| Face Mask, Adult, w/T-valve | This adult facemask with integral non-rebreathing T-valve is a high performance, very low dead space, low airflow resistance mask and valve; suitable for high airflow applications (e.g., exercise physiology). The AFT25 incorporates two gas sampling ports (female Luer) for interfacing with the AFT20 Gas Sampling Kit. Each AFT25 includes one mask. See also: Optional AFT25 Masks… | $737.00 - $825.00Select options |
| Cal. Syringe, 3 liter | The AFT27 3.0 Liter Calibration Syringe is certified to have a volume that meets or exceeds an accuracy of 0.5% of the total displacement volume (3 liters ±0.5%). This adjustable aluminum calibration syringe is shipped with the volume locked to 3.0 L and BIOPAC templates and software settings are set for 3 L. The locking collar and… | $429.00Add to cart |
| Pneumotach Transducer 50 ml/sec Airflow Heated | The SS46L pneumotach can perform a variety of pulmonary measurements relating to airflow, lung volume, and expired gas analysis. Each transducer type consists of an airflow pneumotach head coupled to a precision, highly sensitive, differential pressure transducer (RX137B1 with SS40L). The pneumotach will connect directly to a breathing circuit or plethysmogram chamber. For airflow and… | $0.00Add to cart |
| Heated Airflow Transducer 83 ml/sec | The SS47L is a heated pneumotach suitable for a variety of pulmonary measurements relating to lung volume, airflow, and expired gas analysis. The transducer consists of an airflow pneumotach head coupled to a precision, highly sensitive, differential pressure transducer (RX137C1 and SS40L). The pneumotach will connect directly to a breathing circuit or plethysmogram chamber. For airflow and… | |
| Pneumotach Heated Airflow Transducer 166 ml/sec | The SS48L heated pneumotach can perform a variety of pulmonary measurements relating to lung volume, airflow, and expired gas analysis. Each pneumotach transducer consists of an airflow pneumotach head coupled to a precision, highly sensitive, differential pressure transducer (RX137D1 to SS40L) and is equipped with an internal heating element and 6-volt power supply AC137A. The pneumotachs… | |
| Heated Pneumotach Transducer 583 ml/sec | The SS49L heated pneumotach can perform a variety of pulmonary measurements relating to expired gas analysis, airflow, and lung volume. Each transducer type consists of an airflow pneumotach head coupled to a precision, highly sensitive, differential pressure transducer (RX137E1 with SS40L). The pneumotachs will connect directly to a breathing circuit or plethysmogram chamber. For airflow… | |
| Dissolved O2 Probe Transducer – MP3X/46/45 | The SS69LA transducer measures dissolved oxygen. This easy-to-use dissolved O2 probe relies on fluorescence and has temperature and pressure sensors, allowing it to provide calibrated output with no need for two-point calibration. The cable box contains an SD card which holds calibration information and a switch allowing transducer output to be proportional either to % oxygen… | $895.00Add to cart |
WHAT'S NEW
Applying brain-computer interfaces and robotics to research opens doors to lots of new...
Stay Connected