BIOPAC® Systems, Inc. Logo

Stimulating Electrodes

Request More Info
ELSTM2
Part #: ELSTM1, ELSTM2

Recommended for use when applying a stimulus to animal subjects and tissue preparations

ELSTM1 Unshielded Stimulation Bar Electrode for Research Systems with BNC connector

ELSTM2 Needle electrode has a BNC connector that will interface with either the STM200 or the STMISOLA for animal studies

The dual stainless steel needles are Teflon coated, with a flexible 2.5 meter cable terminating in a BNC connector. The Teflon coating prevents the needle from making contact with the subject except at the very tip of the needle, which is exposed. For applications that require better contact between the electrode and the subject to record a good signal, abrade the needle to remove the Teflon coating.

Note: Needle electrodes are shipped non-sterile, so pre-sterilization is required.

See More...

Stimulating Electrodes
View Spec PDF

Are You Looking for These?

Part #: N/A
Categories: Electrodes - Education, Electrodes - Research
Subcategories: Stimulation - Education, Bar - Research, Stimulation Electrodes - Research

Alternatives
For the same Platform

Details

Compatibility


Use the ELSTM2 with:

  • MP36, MP36R, MP35
    • Low Voltage Stimulator, SS58L
    • Stimulator for MP36/35, BSLSTMB
    • Biopac Student Lab Stimulator for MP3X, BSLSTMA
    • Current or Voltage Linear Isolated Stimulator, STMISOLA
  • MP160 & MP150
    • Stimulator Module (Unipolar Pulse) for  , STM200
    • Current or Voltage Linear Isolated Stimulator, STMISOLA

Support

Downloads/Resources

Knowledge Base

Recommended Items

Spotlight On
Ventilator Validation Kit

Ventilator Validation and Test Equipment

The Ventilator Validation Kit supports new prototype development, existing design validation for production testing, mobile field testing and verification, and other uses where accurate pressure and flow measurements are critical. The Ventilator Validation Kit provides ventilator manufacturers and prototype developers with a complete solution for validating new medical/hospital-grade ventilator products intended for human use. The VVK100-SYS includes […]

View All
Latest News

BIOPAC Systems Helps STARK Industries Launch VITAL Ventilator for NASA JPL

BIOPAC’s ventilator testing equipment and expertise supports STARK Industries’ effort to manufacture, validate, and test NASA JPL’s VITAL Ventilators Goleta, California – June 16, 2020 BIOPAC Systems, Inc. announced a partnership with STARK Industries, LLC to provide ventilator validation and testing equipment for the mass production of ventilators. STARK Industries was awarded a global license […]

New Citations | Go Inside with Imaging Solutions from BIOPAC!

Physiological Lung Testing in the MRI to Find Damage from Military Deployments Our military veterans who served overseas in the middle east often come home with scars both seen and unseen. For some vets, unfortunately, these scars can take the form of lung damage sustained due to sandstorms, burn pits, and other high toxicity situations apparent […]

Read All
Request a Demonstration
Request a Demonstration