BIOPAC® Systems, Inc. Logo

Noninvasive Blood Pressure Amp with Hemodynamics

Setting the New Standard in Blood Pressure Monitoring

Noninvasive beat-to-beat measurements and hemodynamic parameters

Proven solution for consistent, repeatable results

Request More Info
View Cart “O-ring kit for NIBP100D or NIBP100E” has been added to your cart.
Noninvasive BP Amp with Hemodynamics
Part #: NIBP100E-HD

Continuous…Easy to use…Reproducible & Validated

The NIBP100E-HD noninvasive blood pressure system provides a continuous, beat-to-beat, blood pressure signal recorded from the fingers of a subject. Simple and noninvasive—finger sensor provides accurate & immediate feedback: arterial BP, cardiac output, fluid and hemodynamic status.

  • Measure noninvasive BP parameters (BP, sBP, dBP, mBP, and PR) plus hemodynamic parameters (CO, CI, SV,SI, SVR, and SVRI)
  • Analog output options
  • Comfortable & user-friendly
  • Simple setup & quick calibration
  • Integrates with MP160 or MP150 Research System
  • Fully-integrated with AcqKnowledge software to display the blood pressure signal, plus systolic, diastolic, mean blood pressure, heart rate, and a detailed beat‐to‐beat analysis of the blood pressure signal.

The NIBP100E amplifier with CNAP™ technology is controlled by AcqKnowledge software (v5.0.7) Research Software and connects to MP160 or MP150 data acquisition module. The NIBP100E-HD is noninvasive blood pressure system is part of a complete research system, allowing advanced research for multiple applications. (For continuous noninvasive blood pressure without hemodynamic parameters, see NIBP100E.)

See More...

Validated and Proven

Continuity, accuracy & waveform dynamics are equivalent to intraarterial measurement. Proven solution for consistent, repeatable results.

Easy Data Transfer and Analysis

Immediate feedback on BP shortly after startup. Plug & play integration into all common data acquisition systems and subject monitors.

Record Hemodynamic Parameters

Record PPV, SVV, CO, CI, SV, SI, SVR, and SVRI.

noninvasive BP with hemodynamic data
View Spec PDF

Are You Looking for These?

Part #: NIBP100E-HD
Categories: Amplifiers - Research
Subcategories: Noninvasive Blood Pressure - Research

Alternatives
For the same Platform

Equivalents
With a different Platform

Details

Compatibility


Click here for full on-demand NIBP100E training

NIBP100E-HD Components

NIBP100E module with AC150 power supply
NIBP100E-HD License for Hemodynamic Measures (USB Flash Drive: KEY22)
Double-finger cuffs: small, medium, and large (RXNIBPEFINGER-S, -M, -L)
Arm cuffs: small, medium. large, extra-large (RXNIBPDCUF12-19, 17-25, 23-33, 31-40)
CNAP Controller with Holder (RXNIBPECONTROL+M651)
NBP Cuff Hose Extension (M649)
TFC Forearm Controller Strap (M650)
TFC Cable (M652)
USB Cable (CBLUSB)

Continuous NIBP in AcqKnowledgeParameter classification: Sys, Dia, Mean [mmHg] | Pulse [bpm]

Inflation pressure: Typical 120 mmHg (16 kPa) | Min. 30 mmHg (4 kPa) | Max. 300 ±10 mmHg (41.3 kPa ±1.3 kPa)

Measuring range: Systolic 40 – 250 mmHg (5.3 – 33.3 kPa) | Diastolic 30 – 210 mmHg (4 – 28 kPa) | Mean 35 – 230 mmHg (4 – 30.6 kPa)

Heart rate indication range: 30-200 bpm

Excess pressure limit: 300 ±10 mmHg (40 kPa ±1.3 kPa)| Response time: < 3 sec. | Deflation time: < 15 sec | Protection against electric shock:

Type BF Display resolution: 1 mmHg (0.1 kPa)

Measuring ranges

CO: 0,0 – 99,9 l/min
SV: 0 – 500 ml
SVR: 0 – 9999 dyne*s/cm5
PPV: 0-40%
CI: 0,0 – 99,9 l/min/m2
SVI: 0 – 500 ml/m2
SVRI: 0 – 9999 dyne*s/cm5/m2
SVV: 0-40%

NIBP100D Subject Cuff SetupSet-up: Simple and Quick

  • One finger sensor provides all parameters noninvasively–no placing of catheter or additional electrodes
  • Comfortable for subjects in short or long‐term studies

The NIBP100E-HD system is very user friendly and the initial setup and calibration period takes less than three minutes—that time includes placing the cuff around the upper arm and the sensor on the fingers. Placing the finger sensor is as simple as sliding the subject’s fingers through the two cuffs. See the Set Up Guide under the Support tab for more information.

Recording: Immediate Feedback

  • Real‐time, continuous, noninvasive blood pressure displayed only shortly after startup
  • Enables accurate & immediate feedback on BP, PR
  • Proven solution for consistent, repeatable results

Interface: Easy Data Transfer and Analysis with NIBP100E-HD

Interface with BIOPAC’s MP160 and MP150 data acquisition systems running AcqKnowledge 5.0.7 or greater.

See Also

Videos

Measuring Blood Pressure & Advanced Hemodynamic Parameters

NIBP100D Noninvasive Blood Pressure Monitor

Blood Pressure Analysis

Integrating BIOPAC Research Systems | Data Acquisition & Analysis

Support

Applications

Downloads/Resources

Knowledge Base

Manual

Recommended Items

Spotlight On
4-channel DAQ with AcqKnowledge and Workflow License

MP36R Systems with Workflow

This research system ships with an MP36R Data Acquisition unit and AcqKnowledge software licensed for Workflow Automation. MP36R four-channel data acquisition unit has built-in universal amplifiers that can record a wide range of physiological signals. AcqKnowledge Acquisition & Analysis Software is an interactive, intuitive program that lets you instantly view, measure, transform, and analyze data. Perform complex […]

View All
Latest News

New Citations | AcqKnowledge Research Tools

AcqKnowledge is an interactive, versatile software program that allows you to manage data in real time. Perform complex data acquisition, stimulation, triggering and analyses using intuitive navigation. Here are some recent AcqKnowledge citations… The nature of vicarious embarrassment. Journal of Business Research, 153, 355-364. Ziegler, A. H., Allen, A. M., Peloza, J., & Norris, J. I. (2022).    […]

Electrocardiography Guide Now Available

BIOPAC’s comprehensive Introductory ECG Guide addresses fundamental to advanced concerns to optimize electrocardiography data recording and analysis. Topics include: ECG Complex; Electrical and Mechanical Sequence of a Heartbeat; Systole and Diastole; Configurations for Lead I, Lead II, Lead III, 6-lead ECG, 12-lead ECG, precordial leads; Ventricular Late Potentials (VLPs); ECG Measurement Tools; Automated Analysis Routines for extracting, […]

Read All
Request a Demonstration
Request a Demonstration