The Mobita supports TTL trigger inputs from third-party hardware; contact BIOPAC for isolated Trigger interface.
EEG Water electrodes
Completely new type of EEG sensor that measures using just plain water!
Developed during the European BRAIN project, after a period of profound research, the 32-channel EEG ConfiCap is used with an H20 headcap and water electrodes, which eliminate the need for gel. Water electrodes should remain moist for up to eight hours of operation; the rubber ring in the electrode cap must make good contact with the subject to seal off the soaked insert and prevent it from drying out.
The ConfiCap’s green connector most often serves as a subject ground (GND). Simply apply an adhesive snap electrode (such as the BIOPAC EL500 series) to the subject’s forehead and attach the green connector. The Mobita has a “lead off” detection for the ground lead. If the ground lead is disconnected or if there is a poor ground connection, all input signals from the unit will flatline and the ground connection and electrode should be checked.
Analyze with AcqKnowledge