BIOPAC® Systems, Inc. Logo

BioNomadix Wireless PPG and EDA Transmitter

Request More Info
View Cart “BioNomadix Battery Charger” has been added to your cart.
BioNomadix Wireless PPG and EDA Set
Part #: BN-PPGED-T

The Wireless Photo Plethysmogram (PPG) and Electrodermal Activity (EDA/GSR) BioNomadix Transmitter combines these two measurements because they are typically performed on the same part of the body and are often recorded in parallel for a variety of studies.

  • The PPG channel measures Blood Volume Pulse (BVP) via optical plethysmographic methods and provides for heart rate, inter-beat interval and vasodilation/constriction data. Heart Rate Variability (HRV) can be performed on the PPG signal data
  • The EDA/GSR channel—also known as Electrodermal Response, Skin Conductance Activity/Response or Galvanic Skin Response (GSR)—provides for indication of eccrine (skin sweating) activity.

Investigate event-related EDAs and phasic responses using AcqKnowledge‘s analysis routines. Because additional module pairs are fully isolated from one another, comparative EDA/GSR measurements are feasible. For example, EDA/GSR from one hand can be compared to those of the opposing hand. AcqKnowledge includes a fully automated electrodermal response scoring tool that locates skin conductance responses, visually identifies them in the record and measures them. It also automates event related potentials (ERP) analysis by locating the onset of the stimuli and identifying a valid SCR.

Use with the BioNomadix Logger or a matched Receiver to record one or both signals.

See More...

BioNomadix Wireless PPG and EDA Module
View Spec PDF

Are You Looking for These?

Part #: BN-PPGED-T
Categories: Amplifiers - Research, BioNomadix Wireless Physiology - Research
Subcategories: Transmitters - Research

Equivalents
With a different Platform

Details

Compatibility


The BioNomadix setup emulates a “wired” connection from the subject to computer, with all the benefits of a fully-wireless recording system.

PPG and EDA/GSR data is transmitted at a rate of 2000 Hz, providing high resolution signal waveforms at the receiver module’s output. Raw data from the module pair is bandlimited from DC to 10 Hz for both channels, to provide for rapid response PPG and EDA/GSR measurement. Additional internal highpass and lowpass optional filters can help provide for high quality amplification of PPG and EDA/GSR signals, even in the presence of hand/body motion.

The BN-PPGED set is typically used to measure PPG and EDA/GSR signals as manifested on the fingertips of the left or right hand. However, the module pair can also be used to measure PPG and EDA/GSR data on the toes or other body locations.

The PPG signal can also be used in conjunction with the ECG signal to generate an estimate of pulse transit time (PTT) and thus, indirectly, real-time blood pressure. Use AcqKnowledge to evaluate the rate of the pulse signal, as generated by the PPG channel.

 

Use the Focus Areas analysis tool to specify and mark areas of interest in the data and then run automated analysis routines or the cycle detector specifically on the Focus Areas instead of the entire data file.

See Applications > Psychophysiology for further analysis information and advanced features.

Due to battery operation of the wireless transmitter and close proximity to the subject’s body, common-mode rejection ratio is extremely high, considerably in excess of any typical wired biophysical transducer signal recording system. Accordingly, notch filters to remove mains interference (50 or 60 Hz) are available but typically not required.

Attach the transmitter near, or on, the subject’s wrist via stretchy Velcro strap (included) or try the stretch-mesh, pocketed BioNomadix Shirt. Interference with other recording modules or systems is greatly minimized because the module transmitter is completely battery operated and operates totally independently of any other recording grounds or power sources. The recording transmitter is also extremely safe to use, because there is no physical connection to supply mains.

EDA “Electrodermal Activity” is also known as GSR “Galvanic Skin Response.” Use BIOPAC Electrodermal Activety (EDA) equpiment to record Galvanic Skin Response (GSR) Data.

Videos

Integrating BIOPAC Research Systems | Data Acquisition & Analysis

Support

Downloads/Resources

Knowledge Base

Recommended Items

Spotlight On
AcqKnowledge Workflow Action examples

Workflow Automation Licenses

Workflow—A Great Tool for Every Researcher! Automate AcqKnowledge with New Workflow Tool New automation tool significantly saves time and improves consistency with standardized procedures Workflow’s drag-and-drop interface allows you to automate and repeat the signal-conditioning and processing steps your protocol requires in an easy-to-use process without programming or scripting knowledge. Batch process multiple files with confidence […]

View All
Latest News

New Citations | BIOPAC in Ergonomics

Whether using specialized equipment, performing repetitive tasks, or simply going about our daily work routine, the effects of design in our environment as well as the tools we use and the way we use them can impact our health, work performance, and quality of life. Here are a few studies that have recorded and analyzed […]

EDA Guide Available

BIOPAC’s comprehensive EDA Guide provides an introduction to Electrodermal Activity (EDA or GSR) and details topics including: EDA Complex: SCL, SCR, tonic, phasic, specific SCR, non-specific SCR Participant Prep & Electrode Placement Data Recording tips Automated EDA Analysis Routines Digital input to Stim Events Stim-Response Analysis Derive Phasic EDA from Tonic Event-related EDA Analysis Locate […]

Read All
Request a Demonstration
Request a Demonstration