BIOPAC® Systems, Inc. Logo

Accelerometer 2 G

Request More Info
View Cart “Accelerometer 5 G (uses 3 inputs) for MRI” has been added to your cart.
Accelerometer 2G
Part #: TSD109A

This 2 G Tri-Axial Accelerometer high-level output transducer provide three outputs, simultaneously measuring acceleration along the X-, Y- and Z-axes.  TSD109A is optimal for ballistocardiography, stroke volume, respiration, sleep studies, restless leg syndrome, and bruxism.

The transducer can be used on any part of the body or attached to external equipment. The pliable and unobtrusive design conforms readily to body contours and may be easily attached to body extremities. The frequency response extends from DC to 500 Hz. The accelerometer is extremely accurate and can easily be calibrated by simply changing its orientation in three-dimensional space, so that gravity (G=1) acts only upon the desired axis. TSD109 series accelerometers connect directly to the AMI100D or HLT100C interface modules, occupying up to three channels, one channel per measured axis.

Alternative accelerometers include TSD109C3 (±5 G) for measuring accelerations when performing slow movements, such as walking and hand tremor, and TSD109J1 (±200 G), which is more suitable for quick movements, such as swinging a tennis racket. Wireless and MRI options are also available.

See More...

tri-axial accelerometer
View Spec PDF

Are You Looking for These?

Part #: TSD109A
Categories: Transducers - Research
Subcategories: Tri-axial Accelerometers - Research

Alternatives
For the same Platform

Equivalents
With a different Platform

Details

Compatibility


Attachment Guidelines

ss26lb accelerometer strapTSD109A accelerometer includes two Velcro straps for easy attachment to finger (10 cm) or wrist (33 cm); additional straps may be ordered separately in 20, 33, 76, or 137 cm (use part number BN-STRAP-XX).

For other locations, or to prevent cable stress/tugging when the subject moves, which might affect the sensor, the acceleromter can also be taped to the subject. Tape the cable at a point a few inches from the accelerometer board/sensor (the molded part), them make a small loop with the cable after the first taping and then tape the cable again.

MRI applications: Use TSD109A-MRI or TSD109C2-MRI.

For a wireless equivalent, see the BioNomadix Wireless Accelerometer BN-ACCL3.

Support

Downloads/Resources

Knowledge Base

Recommended Items

Spotlight On
physiology data logger

BioNomadix Wireless Wearable Physiology Logger

Offering the industry’s only system that delivers a comprehensive, 24-hour data logging solution in an easy-to-use, easy-to-wear package, the BioNomadix Logger® truly delivers “physiology anywhere.” The BioNomadix Logger is the perfect tool for applications that demand greater degrees of subject freedom and complex experimental design. BioNomadix Loggers wirelessly record physiological data as subjects freely and naturally […]

View All
Latest News

New Citations | Rehabilitating the Rehab Industry & More!

BIOPAC provides software and hardware that allows engineers to study the body. Here are a few notable studies using BIOPAC equipment for Biomedical Engineering research. Rehabilitating the Rehab Industry Could physical therapy be done from the comforts of your own home? If possible, this would open the door for more people with all sorts of ailments to […]

Electrocardiography Guide Now Available

BIOPAC’s comprehensive Introductory ECG Guide addresses fundamental to advanced concerns to optimize electrocardiography data recording and analysis. Topics include: ECG Complex; Electrical and Mechanical Sequence of a Heartbeat; Systole and Diastole; Configurations for Lead I, Lead II, Lead III, 6-lead ECG, 12-lead ECG, precordial leads; Ventricular Late Potentials (VLPs); ECG Measurement Tools; Automated Analysis Routines for extracting, […]

Read All
Request a Demonstration
Request a Demonstration