BIOPAC® Systems, Inc. Logo

Accelerometer 2 G (tri-axial) for MRI

Request More Info
View Cart “Amplifier Input Module” has been added to your cart.
Accelerometer for MRI 2 G
Part #: TSD109A-MRI

This Tri-Axial ±2 G Accelerometer high-level output transducer is optimal for measuring ballistocardiography, stroke volume, respiration, restless leg syndrome, and bruxism; it can also be used as a feedback transducer for subjects in the MRI.

The transducer provides three outputs, simultaneously measuring acceleration along the X-, Y- and Z-axes; ships with a 3-axis interface cable (MECMRI-9 to AMI100D or HLT100C), filter set (MRIRFIF), and two Velcro straps (10 cm and 33 cm).

The frequency response extends from DC to 500 Hz. The accelerometer is extremely accurate and can easily be calibrated by simply changing its orientation in three-dimensional space, so that gravity (G=1) acts only upon the desired axis.

The pliable and unobtrusive design conforms readily to body contours—strap the accelerometer on finger, wrist, toe, or foot.

MRI Use: Conditional to 7T

Condition: Use with provided MECMRI-9 cable and MRIRFIF filter. Conductive parts of transducer are electrically and thermally isolated from subject. (See Specifications for components.)

See More...

2G Tri-axial accelerometry for MRI
View Spec PDF

Are You Looking for These?

Part #: TSD109A-MRI
Categories: MRI Magnetic Resonance Imaging - Research
Subcategories: Transducers - Research

Alternatives
For the same Platform

Equivalents
With a different Platform

Details

Compatibility


ss26lb accelerometer strap

For use in the MRI, the TSD109A-MRI must be used with the provided cable (MECMRI-9) and filter set (MRIRFIF) to connect with an existing AMI100D Amplifier Interface Module or HLT100C High Level Transducer module.

Additional straps may be ordered separately in 20, 33, 76, or 137 cm (use part number BN-STRAP-XX).

Non-MRI Accelerometer options:

  • MP160/MP150: TSD109A, TSD109C2, TSD109F
  • Wireless BioNomadix: BN-ACCL3 for use with matched Transmitter/Receiver or BN-ACCL-T for use with Logger
  • MP36/36R: SS26L, SS34L

Support

Downloads/Resources

Knowledge Base

Recommended Items

Spotlight On
BIOPAC Facial EMG

FEMG Smart Amplifier

The fEMG Electromyography Smart Amplifier is designed specifically for recording facial EMG signals and electrical activity from other small muscle groups. Use with AcqKnowledge™ software to analyze facial expressions and startle paradigms. BIOPAC’s new Smart Amplifiers are designed for great data. Smart Amplifiers improve performance by amplifying the physiological signal close to the subject, which allows a high-level […]

View All
Latest News

New Citations | BIOPAC in Autonomic Function Research

BIOPAC provides software and hardware that allows research teams to run autonomic function tests while collecting physiological data. Here are a few studies focusing on BIOPAC’s ability to record physiological signals during autonomic function testing. The Internet, Sleep, and Heart Rate Does internet usage lead to poorer sleep? Using a BIOPAC Data Acquisition System to measure cardiovascular […]

Electrocardiography Guide Now Available

BIOPAC’s comprehensive Introductory ECG Guide addresses fundamental to advanced concerns to optimize electrocardiography data recording and analysis. Topics include: ECG Complex; Electrical and Mechanical Sequence of a Heartbeat; Systole and Diastole; Configurations for Lead I, Lead II, Lead III, 6-lead ECG, 12-lead ECG, precordial leads; Ventricular Late Potentials (VLPs); ECG Measurement Tools; Automated Analysis Routines for extracting, […]

Read All
Request a Demonstration
Request a Demonstration