BIOPAC offers a range of subject feeback devices for use inside the MRI. These transducers provide accurate results inside the scanner without the need for additional filtering or signal conditioning. The Hand Response Pump Bulb Transducer uses no electrical components which greatly simplifies the setup procedure. See each product page for conditions related to MR use and list of components.
TSD115-MRI Variable Assessment Transducer
The TSD115-MRI incorporates a slide control with graduated scale that allows the user to gauge their subjective response to a variety of different stimuli. Multiple TSD115 transducers can be used simultaneously allowing several people to answer the same question or otherwise respond to stimuli. The transducer is lightweight and fits easily into the subject’s hand or lap. The TSD115-MRI includes an 8m cable which terminates in an SS type connector, with pinout to accommodate MRIRFIF pins (1-5).
Interface:
Hand Response Pump Bulb Transducer
The Pump Bulb Transducer works well when the subject has to give a Yes/No or On/Off Response. The subject holds the bulb in one hand and squeezes to give a response. Use two bulbs for more complicated responses. The bulb is attached to a length of tubing that connects to a TSD160A High Sensitivity Differential Pressure Transducer.
Interface:
TSD121C-MRI Hand Dynamometer
Use to measure clench force. The lightweight, ergonomically designed transducer provides direct readings in kilograms or pounds. The isometric design improves experiment repeatability and accuracy. This device has electrical components and requires the filt
Interface:
TSD110-MRI Pressure Pad / Respiration Transducer
The TSD110-MRI can be mounted in the scanner so that the subject can tap it to respond to a stimulis. Multiple transducers can be used for more complex applications.
Interface:
Hardware Bundles are complete solutions for the specified application. Choose your preferred platform and bundle, then click "Request Pricing" to request an estimate, add/remove items, or complete purchase. If you have questions about specific items, click through to the product web page for details and specifications, or contact your Local Sales contact.
MP160 System
MRI | MRI Subject Feedback
MP160 System with EOG amplifier, cable set, three leads & disposable electrodes for MRI, and impedance checker
MP160 System
MRI | MRI Subject Feedback
MP160 with E-Prime and EDA MRI amplifier, leads and disposable electrodes
MP160 System
MRI | MRI Subject Feedback
MP160 plus AcqKnowledge with transducer amp and respiration transducer for MRI
MP160 System
MRI | MRI Subject Feedback
MP160 plus AcqKnowledge with ECG MRI amp, MRI cable/filter system to biopotential amps, disposable radiotranslucent electrodes and electrode gel
MP160 System
MP160 System
MP160 System
MP160 System
Offering the industry’s only system that delivers a comprehensive, 24-hour data logging solution in an easy-to-use, easy-to-wear package, the BioNomadix Logger® truly delivers “physiology anywhere.” The BioNomadix Logger is the perfect tool for applications that demand greater degrees of subject freedom and complex experimental design. BioNomadix Loggers wirelessly record physiological data as subjects freely and naturally […]
View AllBIOPAC provides software and hardware that allows engineers to study the body. Here are a few notable studies using BIOPAC equipment for Biomedical Engineering research. Rehabilitating the Rehab Industry Could physical therapy be done from the comforts of your own home? If possible, this would open the door for more people with all sorts of ailments to […]
BIOPAC’s comprehensive Introductory ECG Guide addresses fundamental to advanced concerns to optimize electrocardiography data recording and analysis. Topics include: ECG Complex; Electrical and Mechanical Sequence of a Heartbeat; Systole and Diastole; Configurations for Lead I, Lead II, Lead III, 6-lead ECG, 12-lead ECG, precordial leads; Ventricular Late Potentials (VLPs); ECG Measurement Tools; Automated Analysis Routines for extracting, […]
Read All