Modular construction...extreme flexibility
MP systems offer features to support nearly every physiological recording scenario. The following advanced features apply to the application you selected.
If you don't see an Advanced Feature that interests you, please contact BIOPAC so we can identify the best solution for your particular need.
The NIBP100D Noninvasive Blood Pressure System automatically records noninvasive blood pressure. The NIBP100D system attaches to the fingers of a human subject to output a continuous noninvasive arterial pressure (CNAP) signal. The system will work for short and long-term studies that demand several hours of monitoring. Combine the blood pressure signal with a variety of […]
Use the digital I/O lines on the MP System to drive multiple stimulating devices—control lights, buzzers, relays and solenoids. Drive solid-state relays directly from the I/O lines to control high-powered external devices. Use the on-line Calculation channels to create synchronization and control channel outputs.
To interface external devices to the UIM100C for use with an MP System, choose the BIOPAC cable that matches your existing connector type. 3.5 mm mini-phone jack connector requires a CBL100 BNC female connector requires a CBL102 4 mm Double Banana jack connector requires a CBL102 with a CBL106 1/4″ phone jack (6.3 mm) connector […]
The MP system plus BIOPAC amplifiers act as a complete, fully-isolated life science data acquisition system. The MP150 system includes a wide range of physiological amplifiers for wireless, tethered and MRI applications. The system includes electrical stimulation, stimulus presentation options, and a virtual reality interface. The system interfaces via Ethernet to provide a flexible data […]
BIOPAC amplifiers will connect to third-party data acquisition systems, oscilloscopes and chart recording equipment. Use the Isolated Power Supply (IPS100C) to power up to 16 BIOPAC amplifier modules. Snap amplifier modules onto the side of the IPS100C. Use CBL100 series cables to connect to amplifier outputs on the front panel of the IPS100C. The IPS100C […]
To use existing transducers with the DA100C General-purpose Transducer Amplifier, consider the Transducer Connector Interfaces (TCIs). The TCIs plug directly into the DA100C amplifier and present the appropriate mating connector to a wide variety of transducer types. For unusual transducers, use the TCIKIT to create a customized interface.
This option is highly recommended when interfacing third-party (non-BIOPAC) mains powered equipment to an MP system. Use the HLT100C module with INISO and OUTISO signal isolators to provide the interface. The INISO and OUTISO isolators plug directly into any of the 16 analog channels on the HLT100C module and incorporate a 3.5 mm phone jack […]