The Tri-Axial Accelerometers are high level output transducers that provide three outputs, simultaneously measuring acceleration along the X-, Y- and Z-axes.
The TSD109C1 (±5G) is optimal for measuring accelerations when performing slow movements, such as walking and hand tremor.
The TSD109F (±50G) is more suitable for quick movements, such as swinging a tennis racket.
The transducers are the same size and can be used on any part of the body or attached to external equipment. The pliable and unobtrusive design conforms readily to body contours. They come with a Velcro strap for easy attachment.
The frequency response extends from DC to 500 Hz. The accelerometers are extremely accurate and can easily be calibrated by simply changing their orientation in three-dimensional space, so that gravity (G=1) acts only upon the desired axis. The TSD109 series accelerometers connect directly to the HLT100C High Level Transducer module.
Attachment Guidelines:To prevent cable stress/tugging when the subject moves, which might affect the sensor, tape the cable to the subject.
Tape the cable at a point a few inches from the accelerometer board/sensor (the molded part).
Make a small loop with the cable after the first taping and then tape the cable again.
'))
