Research  Transducers  Transducer Connector Interface
INTERFACE SS TO DA100C - TCI114
	$125.00

Transducer connector interface TCI114 is an adapter for BIOPAC SS series "Smart Sensor" transducers to interface with the BIOPAC DA100C module for data acquisition using an MP150 or MP100 System.

TCI114 must be used with a DA100C and the REF ADJ pot. on the DA100C must be set for

• VREF1 to +5V
• VREF2 to -5V

Important Notes

1. The following SS Series Transducers require multiple channel inputs and therefore require a corresponding number of TCI114 with a DA100C for each:

   • SS20L and SS21L Twin-axis Goniometers (2 channels)
   • SS26L and SS27L Tri-Axial Accelerometers (3 channels)
   • SS31L Noninvasive Cardiac Output Sensor (2 channels)
     

2. This interface is designed for SS Series Transducers only

   • SS1L, SS1LA, SS2L, or SS29L Electrode Leads and Adapters - not recommended: signal may be obtained but quality may be impaired.
   • SS53L, SS54L, and SS55L Digital Switches - not supported: digital interface required; use TSD116 Series Switches & Markers.
   • SS58L Low-Voltage Stimulator - not supported.
   • OUT1 Headphones - not supported.