|
|
|
|
|
|
|
|
|
| |
ANALOG INPUT FOR MP30
BNC Input
This BNC input adapter is required when connecting un-isolated third party devices (i.e., amplifiers, chart recorders, or signal generators) while electrodes, attached to human Subjects, are connected to other input channels.
Since all MP inputs share a common isolated ground, connecting an
un-isolated device to any channel voids the isolation for all channels
and exposes the Subject to possible shock hazards.
Connect to the analog input ports on the front panel of the MP30 (labeled "CH1" - "CH4") to record signals from un-isolated third-party devices.
MP36/35 users: use SS70L.
|
|
Input: ±10 V max
Frequency Response: 0-8 kHz
Isolation: 1.5 kV
Attenuation factor: 200
Terminates: female BNC
|
|
|
| |
|
|
)
