This turnkey eye tracking system is for users who have their own means of stabilizing the head and mounting the camera.
Dual input PCI digitizer (capture) card
Two Close Focus Cameras and illuminator systems
ViewPoint PC-60 software with binocular option enabled—record vertical position, horizontal position, pupil size, etc.
Analog output (4 channels)—real-time analog voltage signals
4-Channel 12-Bit Analog Output Board with 48-Bits of Digital I/O
AnalogOut software for use with ViewPoint PC-6
2' 100 Pin High Density Connector to 2 50 Pin IDC
50 Pin Universal Screw Terminal and screws
TTL capabilities
Interface cables to MP System: CBL102 x 4 and CBL106 x 4
Use the full power of the MP Research System and AcqKnowledge software.
To record biopotential signals in the same record while maintaining subject isolation, add an HLT100C and one INISO for each eye track channel
Fee based consulting for integration can be provided.
This eye tracking system utilizes ArringtonResearch® technology and includes cables required to interface to a BIOPAC MP SYstem—MP150 or MP100 data acquisition unit and AcqKnowledge software.
Connections to use the eye track setup with an MP System with AcqKnowledge:
Eye tracking with biopotentials
This setup records eye tracking signals and biopotential signals in one data file for comprehensive analysis.
Add an HLT100C and one INISO for each eye track channel and connect in this order:
A. One CBL102 from each eye track channel on the PC card to an INISO. B. INISO from each eye track channel to HLT100C. C. HLT100C to UIM100C. D. BIOPAC amplifier/transducer for desired signal(s) to UIM100C and subject.
2. Calibrate the analog inputs.
A. Eye track channels (i.e., vertical position: look up, center, down). B. Biopotentials if specifed for the amplifier/transducer.
Eye tracking only
Connect one CBL102 from each eye track channel on the PC card to the UIM100C.
Calibrate the analog inputs.
A. Eye track channels (i.e., vertical position: look up, center, down).
)
