This turnkey system provides everything required to add monocular HMD eye tracking to an nVis SX HMD, including hardware, software, and professional mounting to the HMD at the factory. The system can be added to a new nVis SX purchased from BIOPAC (HMD2) or to an existing nVis SX HMD; if the system is being added to an existing nVis SX, the unit must be returned to BIOPAC for modification.
Dual input PCI digitizer (capture) card
ViewPoint PC-60 software—record vertical position, horizontal position, pupil size, etc.
Two eye camera and illuminator systems
eye camera and illuminator system and either a color 70º horizontal field of view scene camera ora black and white 60º horizontal field of view scene camera
Universal power supply with country specific adaptor and 10 M video and power cable.
Waist pack cable holder (not shown)
Analog output (4 channels)—real-time analog voltage signals
4-Channel 12-Bit Analog Output Board with 48-Bits of Digital I/O
AnalogOut software for use with ViewPoint PC-6
2' 100 Pin High Density Connector to 2 50 Pin IDC
50 Pin Universal Screw Terminal and screws
TTL capabilities
Interface cables to MP System: CBL102 x 4 and CBL106 x 4
Use the full power of the MP Research System and AcqKnowledge software.
To record biopotential signals in the same record while maintaining subject isolation, add an HLT100C and one INISO for each eye track channel
This eye tracking system utilizes ArringtonResearch® technology and includes cables required to interface to a BIOPAC MP SYstem—MP150 or MP100 data acquisition unit and AcqKnowledge software.
)
