Record multiple channels with differing sample rates
Record at speeds up to 400 kHz (aggregate)
Place one or more MP150 Data Acquisition Systems in a local area network (LAN). Use any PC in the LAN to record from any MP150 system in the network.
Compatibility Note- The MP150WSW Systems ships with an ETHCARD1 for desktop computers. If preferred, specify ETHCARD2 when ordering; ETHCARD2 is a 10/100Mbps Fast Ethernet 32-bit CardBus adapter for notebooks.
AcqKnowledge is an interactive, intuitive program that lets you instantly view, measure analyze and transform data. Perform complex data acquisition, stimulation, triggering and analyses using simple pull-down menus and dialogs—no need to learn a programming language or new protocol. Online analysis settings, filters and transformations provide real-time feedback, or you can choose from a wide variety of off-line analysis tools. Multiple display options are available during and after acquisitionjust click on an icon to flip between Chart, Scope, XY, Histogram or FFT. The software also includes quality presentation capabilities.
The AcqKnowledge Lab Assistant GLP software promotes lab efficiency and full compliance with the Food and Drug Administrations (FDA) Good Laboratory Practice (GLP) requirements (21 CFR Part 11). The Lab Assistant is much more than a GLP solution, it provides any lab with improved security, data integrity, configurable user interface, and also Standard Operating Procedure (SOP) checking. The Lab Assistant is customizable and will provide some or all of the following features, dependent upon your requirements.
For hardware specifications, click to open the MP Systems Hardware Guide(also available under the Resources tab above) and search for the desired items.
MP150 System Components
1 AcqKnowledge Lab Assistant GLP software for Windows ACK100W-G
1 Ethernet-ready data acquisition unit MP150ACE
1 Universal Interface Module UIM100C
1 network interface card ETHCARD1
1 Ethernet crossover cable CBLETH2
1 12V Power transformer with cord (specify USA or EURO) AC150A
MP150 Data Acquisition Unit Specifications
Analog Inputs Number of Channels: 16 Absolute Maximum Input: ±15 V Operational Input Voltage: ±10 V A/D Resolution: 16 Bits Accuracy (% of FSR): ±0.003 Input impedance: 1.0 MOhm Analog Outputs Number of Channels: 2 Max number of waveforms output with acquisition: 2 Output Voltage Range: ±10 V D/A Resolution: MP150: 16 bits, MP100: 12 Bits Accuracy (% of FSR): MP150: ±0.003 Output Drive Current: ±5 mA (max) Output Impedance: 100 Ohm Digital I/O Number of Channels: 16 Voltage Levels: TTL, CMOS Output Drive Current: ±20 mA (max) External Trigger Input: TTL, CMOS compatible Time Base Min Sample Rate: 2 samples/hour Trigger Options: Internal, External or Signal Level Power Amplifier Module Isolation: Provided by the MP unit CE Marking: EC Low Voltage and EMC Directives Leakage current: <8 µA (Normal), <400 µA (Single Fault) Fuse: 2 A (fast blow) Max Sample Rate MP Internal Memory: 200 K samples/sec (400K aggregate) PC Memory/Disk: 200 K samples/sec (400K aggregate) Internal Buffer: 6 M samples Analog Output Buffer: 512 Ks per analog output channel Serial Interface Type/Rate: Ethernet: UDP (10M bits/sec) Transmission Type: Ethernet Maximum cable length: 100 meters (Ethernet cable) Power Requirements: 12VDC @ 2 amp (uses AC150A, included) Dimensions: 10cm x 11cm x 19cm Weight: 1.0 kg OS Compatibility see Compatibility: OS & Computer Requirements
Isolation Designed to satisfy the following Medical Safety Test Standards affiliated with IEC601-1: Creepage and Air Clearance Dielectric Strength Patient Leakage Current Signal conditioning module compatibility CO2100C EGG100C HLT100C PPG100C DA100C EMG100C LDF100C RSP100C EBI100C EOG100C MCE100C SKT100C ECG100C ERS100C O2100C STM100C EEG100C GSR100C OXY100C TEL100C Cleaning procedures
Be sure to unplug the power supply from the MP150 before cleaning. To clean the MP150, use a damp, soft cloth. Abrasive cleaners are not recommended as they might damage the housing. Do not immerse the MP150 or any of its components, as this can damage the system. Let the unit air-dry until it is safe to reconnect the power supply.
)
