The MP150 data acquisition and analysis system provides a flexible tool for your life science research and teaching needs. The modular, powerful data acquisition interface system for
Windows OS can be used with BIOPAC's amplifiers and accessories AND with equipment you already have.
The MP150 data acquisition systems include all hardware, AcqKnowledge software and guides you need to get started. The software, hardware and tutorial guides are provided in digital, PDF format for easy access and search options while running AcqKnowledge; printed guides are also available—see MANMPSYS.
AcqKnowledge data acquisition and analysis software is an interactive, intuitive program that lets you instantly view, measure, analyze, and transform data. Perform complex data acquisition, stimulation, triggering and analyses using simple pull-down menus and dialogs—no need to learn a programming language or new protocol. Online analysis settings, filters, and transformations provide real-time feedback, or you can choose from a wide variety of off-line analysis tools. Multiple display options are available during and after acquisition—just click on an icon to flip between Chart, Scope, X/Y, Overlapped segments, Histogram, or FFT. The software also includes quality presentation capabilities.
To put together a system for your specific needs, start with one of our Starter Systems, then add the amplifier modules, transducers and electrodes to match your research design.
The NEW MP150 offers:
Ethernet-ready data acquisition and analysis
Record multiple channels with differing sample rates
Record at speeds up to 400 kHz (aggregate)
Place one or more MP150 Systems in a local area network (LAN). Use any PC in the LAN to record from any MP150 system in the network.
Compatibility Notes
ETHCARD The MP150WSW Systems ships with an ETHCARD1 for desktop computers. If preferred, specify ETHCARD2 when ordering; ETHCARD2 is a 10/100Mbps Fast Ethernet 32-bit CardBus adapter for notebooks.
Available in Your Native Language
AcqKnowledge 3.8.2 software translations are available in Chinese (simplified and traditional), French, Italian, Japanese, and Spanish. Translations are provided based on the primary language of the buyer's locale (as indicated in the shipping address) and include the current English release. For special requests, please contact BIOPAC.
For hardware specifications, click to open the MP Systems Hardware Guide (also available under the Resources tab above) and search for the desired items.
MP150 System Components
1 Ethernet-ready data acquisition unit MP150ACE
1 universal interface module UIM100C
1* AcqKnowledge software for Windows Vista with electronic manual (searchable PDF files) ACK100W
1 network interface card ETHCARD1
1 Ethernet crossover cable CBLETH2
1 12 V power transformer with cord (specify USA or EURO) AC150A
* When AcqKnowledge translation software is ordered, an English version of the software is also sent.
MP150 Data Acquisition Unit Specifications
Analog Inputs Number of Channels: 16 Absolute Maximum Input: ±15 V Operational Input Voltage: ±10 V A/D Resolution: 16 Bits Accuracy (% of FSR): ±0.003 Input impedance: 1.0 MOhm Analog Outputs Number of Channels: 2 Max number of waveforms output with acquisition: 2 Output Voltage Range: ±10 V D/A Resolution: MP150: 16 bits, MP100: 12 Bits Accuracy (% of FSR): MP150: ±0.003 Output Drive Current: ±5 mA (max) Output Impedance: 100 Ohm Digital I/O Number of Channels: 16 Voltage Levels: TTL, CMOS Output Drive Current: ±20 mA (max) External Trigger Input: TTL, CMOS compatible Time Base Min Sample Rate: 2 samples/hour Trigger Options: Internal, External or Signal Level Power Amplifier Module Isolation: Provided by the MP unit CE Marking: EC Low Voltage and EMC Directives Leakage current: <8 µA (Normal), <400 µA (Single Fault) Fuse: 2 A (fast blow) Max Sample Rate MP Internal Memory: 200 K samples/sec (400K aggregate) PC Memory/Disk: 200 K samples/sec (400K aggregate) Internal Buffer: 6 M samples Analog Output Buffer: 512 Ks per analog output channel Serial Interface Type/Rate: Ethernet: UDP (10M bits/sec) Transmission Type: Ethernet Maximum cable length: 100 meters (Ethernet cable) Power Requirements: 12VDC @ 2 amp (uses AC150A, included) Dimensions: 10cm x 11cm x 19cm Weight: 1.0 kg OS Compatibility see Compatibility: OS & Computer Requirements
Isolation Designed to satisfy the following Medical Safety Test Standards affiliated with IEC601-1: Creepage and Air Clearance Dielectric Strength Patient Leakage Current Signal conditioning module compatibility CO2100C EGG100C HLT100C PPG100C DA100C EMG100C LDF100C RSP100C EBI100C EOG100C MCE100C SKT100C ECG100C ERS100C O2100C STM100C EEG100C GSR100C OXY100C TEL100C
Cleaning procedures
Be sure to unplug the power supply from the MP150 before cleaning. To clean the MP150, use a damp, soft cloth. Abrasive cleaners are not recommended as they might damage the housing. Do not immerse the MP150 or any of its components, as this can damage the system. Let the unit air-dry until it is safe to reconnect the power supply.
)
Windows OS can be used with BIOPAC's amplifiers and accessories AND with equipment you already have.
